Member Profile - satogixxer's GT MY10 - 374KW ATW

Show off what mods you've done to your car.

Re: Member Profile - satogixxer's GT MY10 - 374KW ATW

Postby superjoshism » Wed May 31, 2017 9:46 am

satogixxer wrote:Basically nothing has happened with anything since my last post <sigh>. Can't say I'm surprised though. :roll:

Still waiting on Bruce from Custom Cluster Development to finish my cluster so I can fit my Motec C127. I submitted the design in Sep last year and sent a stock instrument cluster to CCD in December so they could start work. It shouldn't take this long!

And, as for the built gearbox.... I gave up on PAR entirely after waiting almost a year. Ridiculous.

I'm starting to think I'll die of old age before this car is ever finished. I'm sure my mental health is suffering from just "waiting" for things to, maybe, eventuate. :crazy:

Anyway thankfully as of this week I can say there is some light at the end of the tunnel (and not because I've died of old age).

The plan now is to do a gearbox conversion to a WRX STI 6 speed instead.

Not an easy job I'm told. Custom fabrication needed to fit the STI gearbox and move the engine mount position. The headers need to be redesigned and wastegates moved as well. Will also replace driveline components and clutch etc. The car has been back and forth to G88 a few times in the past months to get measurements taken etc. to see if it is possible.

This should be a much better long term solution as well, since various components of my car should then be interchangeable with WRX STI parts, of which there are heaps more options available (i.e. a sequential gearbox should just drop in, hmmmmm).

Work should be underway in June... fingers crossed everything goes to plan!


Bit late to the party but I'm speaking to All Drive Subaroo at the moment about building my stock 6MT to handle the torque that our cars put down with a TBE and standard engine. Second gear seems to want to explode around the 500nm mark, heaps of US guys are replacing boxes left right and centre. Long story short, our boxes share the same internals as a 2015+ WRX aside from reverse gear which is slightly different, and ADS are confident they can build stronger gearsets for our boxes. Might be an option for you as opposed to going down the STi gearbox path.
'09 MY10 Liberty GT Premium, 6MT, Pearl White
Summit Front Strut Bar | Cusco Rear Strut Bar | Whiteline F&R Swaybars | Kartboy F&R Endlinks | Eibach Pro-Kit Springs | Whiteline Anti-Lift | Whiteline Roll Centre Correction | Perrin Shifter Stop | Perrin Brass Shifter Bush | Perrin Short Shift Adapter | Perrin Steering Lockdown | STI GroupN Transmission Mount | Whiteline Positive Shift Bushes | Whiteline Rear Diff Inserts | Whiteline Rear Subframe Inserts | Whiteline LCA Bushes | Intake Resonator Delete | HKS Dump | GFB Respons BPV | DBA T2's | Goodridge Brake Lines

Build thread here
User avatar
superjoshism
 
Posts: 253
Joined: Thu Aug 21, 2014 10:17 pm
Location: Adelaide, SA
Car: MY10 Liberty GT Premium
Real name: Josh
Profile URL: viewtopic.php?f=10&t=27908

Re: Member Profile - satogixxer's GT MY10 - 374KW ATW

Postby satogixxer » Sat Jun 03, 2017 3:01 pm

It was 3rd gear that got destroyed in mine.

Image
[Liberty GT MY10 6MT]: STI bits | STI Brembo's + Dixcel | DAMD D-shape | Cusco coilovers & sways | Xtreme clutch | BLITZ pod | Plazmaman FMIC | Deshele built EJ25 | Emtron ECU | BorgWarner EFR 7670 | 374kw atw
[Outback 3R MY04]: Stock as a rock
Profile video here
User avatar
satogixxer
 
Posts: 766
Joined: Mon Oct 15, 2012 10:04 pm
Location: NSW, Western Sydney
Car: '10 Liberty GT 6MT + '04 Outback 3R
Real name: Michael
Profile URL: viewtopic.php?f=10&t=20495

Re: Member Profile - satogixxer's GT MY10 - 374KW ATW

Postby applegeek897 » Sat Jun 03, 2017 3:22 pm

Interesting, are the 6MT's in a Gen 5 GT different to those in a Gen 4 H6/GT FL?
Daily: '00 Daihatsu Cuore "Kelly" - Build Thread -
Project / Weekender: '05 Subaru Liberty 3.0R-B Wagon - Build Thread -
Motorcycle: '14 Triumph Street Triple 660 - Build Thread -
User avatar
applegeek897
 
Posts: 214
Joined: Sun Jun 07, 2015 1:02 am
Location: Sydney, NSW
Car: 05' 3R-B Wagon, 00' Daihatsu Cuore
Real name: James
Profile URL: viewtopic.php?f=10&t=31247

Re: Member Profile - satogixxer's GT MY10 - 374KW ATW

Postby satogixxer » Sat Jun 03, 2017 7:07 pm

applegeek897 wrote:Interesting, are the 6MT's in a Gen 5 GT different to those in a Gen 4 H6/GT FL?

I think they're different. Gen 5 GT has a cable operated shifter for one thing (like the 2015 WRX). Also it seems my specific gearbox was only ever used in the 2010 & 2011 model GT. It changed again in 2012+.
[Liberty GT MY10 6MT]: STI bits | STI Brembo's + Dixcel | DAMD D-shape | Cusco coilovers & sways | Xtreme clutch | BLITZ pod | Plazmaman FMIC | Deshele built EJ25 | Emtron ECU | BorgWarner EFR 7670 | 374kw atw
[Outback 3R MY04]: Stock as a rock
Profile video here
User avatar
satogixxer
 
Posts: 766
Joined: Mon Oct 15, 2012 10:04 pm
Location: NSW, Western Sydney
Car: '10 Liberty GT 6MT + '04 Outback 3R
Real name: Michael
Profile URL: viewtopic.php?f=10&t=20495

Re: Member Profile - satogixxer's GT MY10 - 374KW ATW

Postby alexeiwoody » Sun Jun 04, 2017 12:04 am

satogixxer wrote:
applegeek897 wrote:Interesting, are the 6MT's in a Gen 5 GT different to those in a Gen 4 H6/GT FL?

I think they're different. Gen 5 GT has a cable operated shifter for one thing (like the 2015 WRX). Also it seems my specific gearbox was only ever used in the 2010 & 2011 model GT. It changed again in 2012+.


Yes, they're very different guys. Gen5 is essentially a 5 speed with an extra gear added, while the gen4 6MT is actually a nice beefy box, very much like the Sti 6MTs. Guys are running insane power on stock gen4/Sti 6 speeds.
Running no. of weeks without breaking something in the lib: 0
No. of things still to fix in in the lib: 43
User avatar
alexeiwoody
 
Posts: 1893
Joined: Thu Jul 12, 2012 11:47 pm
Location: Melbourne
Car: MY07 LibGT 5EAT
Real name: Alexei

Re: Member Profile - satogixxer's GT MY10 - 374KW ATW

Postby applegeek897 » Sun Jun 04, 2017 10:33 am

alexeiwoody wrote:
satogixxer wrote:
applegeek897 wrote:Interesting, are the 6MT's in a Gen 5 GT different to those in a Gen 4 H6/GT FL?

I think they're different. Gen 5 GT has a cable operated shifter for one thing (like the 2015 WRX). Also it seems my specific gearbox was only ever used in the 2010 & 2011 model GT. It changed again in 2012+.


Yes, they're very different guys. Gen5 is essentially a 5 speed with an extra gear added, while the gen4 6MT is actually a nice beefy box, very much like the Sti 6MTs. Guys are running insane power on stock gen4/Sti 6 speeds.


I see, that's why I was confused. Clears it up. Interesting.
Daily: '00 Daihatsu Cuore "Kelly" - Build Thread -
Project / Weekender: '05 Subaru Liberty 3.0R-B Wagon - Build Thread -
Motorcycle: '14 Triumph Street Triple 660 - Build Thread -
User avatar
applegeek897
 
Posts: 214
Joined: Sun Jun 07, 2015 1:02 am
Location: Sydney, NSW
Car: 05' 3R-B Wagon, 00' Daihatsu Cuore
Real name: James
Profile URL: viewtopic.php?f=10&t=31247

Re: Member Profile - satogixxer's GT MY10 - 374KW ATW

Postby superjoshism » Sun Jun 04, 2017 11:03 pm

Yep, what others have said. The split-case 6MT in the 2015+ WRX and Gen5 is essentially a WRX 5 speed with another gear shoved in, whereas the Gen4 6MT is essentially an STi gearbox without DCCD. I think some had different ratios and were mated to an R160 diff instead of the R180 found in the STi too.

I ended up getting a quote from ADS for a built box including a new shot peened and ISF treated gearset, carbon fibre synchros, and RS20 viscous coupling. They advised it was good to handle 250awkw, probably more but they hadn't tested it beyond that.

I'm not going to publicly share the price, but it wasn't as bad as I expected seeing as this was an exchange service. PM me if you want the price I was quoted.
'09 MY10 Liberty GT Premium, 6MT, Pearl White
Summit Front Strut Bar | Cusco Rear Strut Bar | Whiteline F&R Swaybars | Kartboy F&R Endlinks | Eibach Pro-Kit Springs | Whiteline Anti-Lift | Whiteline Roll Centre Correction | Perrin Shifter Stop | Perrin Brass Shifter Bush | Perrin Short Shift Adapter | Perrin Steering Lockdown | STI GroupN Transmission Mount | Whiteline Positive Shift Bushes | Whiteline Rear Diff Inserts | Whiteline Rear Subframe Inserts | Whiteline LCA Bushes | Intake Resonator Delete | HKS Dump | GFB Respons BPV | DBA T2's | Goodridge Brake Lines

Build thread here
User avatar
superjoshism
 
Posts: 253
Joined: Thu Aug 21, 2014 10:17 pm
Location: Adelaide, SA
Car: MY10 Liberty GT Premium
Real name: Josh
Profile URL: viewtopic.php?f=10&t=27908

Re: Member Profile - satogixxer's GT MY10 - 374KW ATW

Postby applegeek897 » Mon Jun 05, 2017 4:02 pm

superjoshism wrote:Yep, what others have said. The split-case 6MT in the 2015+ WRX and Gen5 is essentially a WRX 5 speed with another gear shoved in, whereas the Gen4 6MT is essentially an STi gearbox without DCCD. I think some had different ratios and were mated to an R160 diff instead of the R180 found in the STi too.

I ended up getting a quote from ADS for a built box including a new shot peened and ISF treated gearset, carbon fibre synchros, and RS20 viscous coupling. They advised it was good to handle 250awkw, probably more but they hadn't tested it beyond that.

I'm not going to publicly share the price, but it wasn't as bad as I expected seeing as this was an exchange service. PM me if you want the price I was quoted.


Yeah I might speak to them too, my 4th syncro has always been a bit sus and 2nd can be so hard to down shift into, even with perfect rev matches, I might speak to them too.
Daily: '00 Daihatsu Cuore "Kelly" - Build Thread -
Project / Weekender: '05 Subaru Liberty 3.0R-B Wagon - Build Thread -
Motorcycle: '14 Triumph Street Triple 660 - Build Thread -
User avatar
applegeek897
 
Posts: 214
Joined: Sun Jun 07, 2015 1:02 am
Location: Sydney, NSW
Car: 05' 3R-B Wagon, 00' Daihatsu Cuore
Real name: James
Profile URL: viewtopic.php?f=10&t=31247

Re: Member Profile - satogixxer's GT MY10 - 374KW ATW

Postby Libacy Gt » Fri Aug 18, 2017 9:32 am

UPDATES!? :)
Libacy Gt
 
Posts: 190
Joined: Sun Oct 16, 2016 3:13 pm
Car: Lib Gt Wagon Gen 5, 5EAT 2011
Profile URL: viewtopic.php?f=10&t=34162

Re: Member Profile - satogixxer's GT MY10 - 374KW ATW

Postby satogixxer » Sun Mar 18, 2018 1:39 pm

Wow - can't believe my last post was in June... far out. Anyway it's been a long time since an update, but things have been happening - just very slowly as per usual. :(

- The gearbox conversion to a WRX STI Spec C 6 speed was actually completed months ago.
- Also finished upgrading all drive line components (R180 rear diff, custom tail shaft, custom driveshafts, HKS LA twin plate clutch, etc).
- Fuel system has been revised, so the surge tank now consists of a dual pump setup which should hopefully address the drop in fuel pressure at 380awkw.

So the car has essentially been ready for quite a while, but unfortunately sitting waiting on tuning for months now.... hopefully not too long off but who knows.

In other news, I finally received my custom cluster a couple of weeks ago (after waiting 1.5 years!). :mrgreen:

Looks fantastic, and exactly to my design specs. Bruce at CCD does great quality work, but the wait time is ridiculous.
Image
So now I just need to get this installed and my MoTeC C127 set up, which should happen when the car gets tuned.

Also decided to upgrade to 19" wheels for the street which should fill the guards a bit more without having to go any lower.

I'd noticed last year Yokohama released the ADVAN RS-DF Progressive in 19x9.5 5x100 so had been thinking about it for a while... always liked this wheel but they weren't available when I bought the ZE40's, otherwise I probably would have bought these in the first place. Oh well, now I have a set of ZE40 18's for the track I suppose, haha.
ImageImageImage
Image
Now just waiting for new tyres to be fitted.

Decided on Michelin Pilot Sport 4 S 255/35R19 as these should be more compliant on the street than the AD08R's which I was finding quite harsh to be honest, especially with our shitty roads.

Finally, this happened to my Outback 3R a couple of months ago... quite a milestone - and still going strong. :o
Image
[Liberty GT MY10 6MT]: STI bits | STI Brembo's + Dixcel | DAMD D-shape | Cusco coilovers & sways | Xtreme clutch | BLITZ pod | Plazmaman FMIC | Deshele built EJ25 | Emtron ECU | BorgWarner EFR 7670 | 374kw atw
[Outback 3R MY04]: Stock as a rock
Profile video here
User avatar
satogixxer
 
Posts: 766
Joined: Mon Oct 15, 2012 10:04 pm
Location: NSW, Western Sydney
Car: '10 Liberty GT 6MT + '04 Outback 3R
Real name: Michael
Profile URL: viewtopic.php?f=10&t=20495

Re: Member Profile - satogixxer's GT MY10 - 374KW ATW

Postby bigBADbenny » Sun Mar 18, 2018 2:03 pm

Definitely the kind of update worth waiting for :good:
User avatar
bigBADbenny
 
Posts: 8271
Joined: Tue Oct 04, 2011 6:36 pm
Location: Collingwood, Melbourne
Car: MY07 GT-B 6MT OBP Wagon
Real name: Ben Richards
Profile URL: http://tinyurl.com/agvbzop

Re: Member Profile - satogixxer's GT MY10 - 374KW ATW

Postby applegeek897 » Sun Mar 18, 2018 7:46 pm

Wow man that is crazy, I feel insufficient only having 355,000km's. The H6 really is impressive, but not as much as your Gen 5, so happy to see you progressing with it man!
Daily: '00 Daihatsu Cuore "Kelly" - Build Thread -
Project / Weekender: '05 Subaru Liberty 3.0R-B Wagon - Build Thread -
Motorcycle: '14 Triumph Street Triple 660 - Build Thread -
User avatar
applegeek897
 
Posts: 214
Joined: Sun Jun 07, 2015 1:02 am
Location: Sydney, NSW
Car: 05' 3R-B Wagon, 00' Daihatsu Cuore
Real name: James
Profile URL: viewtopic.php?f=10&t=31247

Re: Member Profile - satogixxer's GT MY10 - 374KW ATW

Postby dr20t » Sun Mar 18, 2018 8:38 pm

Well done mick

Really loving that update

Especially impressed with the cluster :good:

Can't wait to go for a ride once retuned

Mick
Addicted to corn juice....

My FrankenStien build thread here: viewtopic.php?t=14137
User avatar
dr20t
 
Posts: 4184
Joined: Sun Oct 23, 2011 10:43 pm
Location: South West Sydney NSW
Car: 04 Liberty GT Auto
Real name: Mick
Profile URL: viewtopic.php?t=14137

Re: Member Profile - satogixxer's GT MY10 - 374KW ATW

Postby jslayz » Tue Mar 20, 2018 12:01 am

FVCKING SERIOUS UNIT !!! :D
CURRENT - ATP GTX 3576 - 22psi - 283.7awkw
OLD - Dom 1.5Xtr - Last dyno 254ahkw, previous 238ahkw, first 224awkw.
My journey thread: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523
My Lib Pics here: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523&start=570#p370656
User avatar
jslayz
 
Posts: 2810
Joined: Tue Mar 09, 2010 11:32 pm
Location: Perthhhhhh
Car: 2005 Liberty GT Wagon
Real name: J

Re: Member Profile - satogixxer's GT MY10 - 374KW ATW

Postby superjoshism » Thu Mar 22, 2018 9:04 pm

Holy shitballs!

How difficult was the STi gearbox swap?!
'09 MY10 Liberty GT Premium, 6MT, Pearl White
Summit Front Strut Bar | Cusco Rear Strut Bar | Whiteline F&R Swaybars | Kartboy F&R Endlinks | Eibach Pro-Kit Springs | Whiteline Anti-Lift | Whiteline Roll Centre Correction | Perrin Shifter Stop | Perrin Brass Shifter Bush | Perrin Short Shift Adapter | Perrin Steering Lockdown | STI GroupN Transmission Mount | Whiteline Positive Shift Bushes | Whiteline Rear Diff Inserts | Whiteline Rear Subframe Inserts | Whiteline LCA Bushes | Intake Resonator Delete | HKS Dump | GFB Respons BPV | DBA T2's | Goodridge Brake Lines

Build thread here
User avatar
superjoshism
 
Posts: 253
Joined: Thu Aug 21, 2014 10:17 pm
Location: Adelaide, SA
Car: MY10 Liberty GT Premium
Real name: Josh
Profile URL: viewtopic.php?f=10&t=27908

PreviousNext

Return to Post your mods

Who is online

Users browsing this forum: No registered users and 3 guests