Member Profile - J0HNATH0N

[agan]

New grill pic added, K&N installed and LED boot light also (damn it is bright)

Looks like tint will be very soon. Im thinking ~20%....

I wanna hear the K&N!!!

Tint? Yes..go at least 20 or below LOL.

But that means slightly harder to reverse a long driveway

[J0HNATH0N]

K&n makes a little bit of noise difference, but I'm sure more noticeable in the GT's

20% is the darkest ill go Pat :p

[andy_eca]

Very nice car with the white badge

[dawesy]

K&n makes a little bit of noise difference, but I'm sure more noticeable in the GT's

20% is the darkest ill go Pat :p

Take rhe resinator off the bottom of the airbox I've done that with a k&n sounds wicked on WOT

[SH30RB]

K&n makes a little bit of noise difference, but I'm sure more noticeable in the GT's

20% is the darkest ill go Pat :p

Take the resonator off the bottom of the air box I've done that with a k&n sounds wicked on WOT

that's my exact set up too
a few friends thought i had a supercharger...

[cruisn]

that's my exact set up too
a few friends thought i had a supercharger...

Uneducated Commo/Ford driving friends.

[SH30RB]

that's my exact set up too
a few friends thought i had a supercharger...

Uneducated Commo/Ford driving friends.

indeed they were!

[J0HNATH0N]

Haha yeah resonator is off. Induction is pretty sweet

[J0HNATH0N]

Thought i would add on here the new mods i have done,

Just finished making my own fog surrounds. Matched the grill that i modified.

Here are the results.....

new mods.jpg (148.95 KiB) Viewed 4791 times

[Boostaddict]

Nice work on the fog surrounds .

I would be keen to see a good close up shot of the front of the surrounds and behind to see how you have done it.

I have to hack mine up because of FMIC piping and have never liked the result . I thought of doing what you have done , or at least what I think you have done.

So take them off and pic of front and back please!!

Don't want much..... But do it now!!

Ahhahahahaha

Dan

[J0HNATH0N]

Thanks

Gonna be a bitch to take out but I have my LED fog lights coming next week so when I take the bumper off it will be easier to get off.

Basically cut out all the middle, cut a circle around the fog light, then meshed from behind. Was a PITA and is not 100% perfect, but I'm happy with the result

[Boostaddict]

Thanks

Gonna be a bitch to take out but I have my LED fog lights coming next week so when I take the bumper off it will be easier to get off.

Basically cut out all the middle, cut a circle around the fog light, then meshed from behind. Was a PITA and is not 100% perfect, but I'm happy with the result

All im hearing in whinge whinge whinge..... Just get it done!!!

That is exactly what i thought you had done with the mesh. What i want to see is how you attached it at the back of the cover, so just pop them put and take some pics, or does the 3.0 liter differ to my gtb bar in terms of the fog covers?? Because of my IC pipes actually coming out forward and past the fog light covers i want to bend the mesh around the pipes and hid them.

[J0HNATH0N]

It's been a while since I've posted so maybe I'll put up the new mods.

Raptor headers on
Outback bonnet installed
Widebody wrx mufflers fitted
Kicker 8"sub installed
KiDo tuned
Bc coilovers
Matt blacked spoiler

Guards being rolled asap

Dvr dual camera and reverse can being installed next week

Roof and wheels soon to be matt blacked and red walls with black wheel nuts.

mms_img-1724344624.jpg (195.94 KiB) Viewed 4589 times

mms_img-1513699195.jpg (226.68 KiB) Viewed 4589 times

[bigBADbenny]

What dvr?

[J0HNATH0N]

What dvr?

Uniden Igocam850. Two cam recording and a third reverse cam that can have one front one rear recording.