Member profile - paggaz

[bigBADbenny]

Welcome to da club... Love that tune!
Fitting a front upper strut brace, i noticed improved handling on e.g. off camber sweepers.
Get one, it's bling you'll appreciate

[KiDo_Tuning]

Welcome to da club... Love that tune!
Fitting a front upper strut brace, i noticed improved handling on e.g. off camber sweepers.
Get one, it's bling you'll appreciate

Wait until I can activate per gear boost control on yours!

[agan]

omg... I can't wait for my turn!!!

[Bezzza]

omg... I can't wait for my turn!!!

Getting a remote tune done Patrick?
Matt @ kido sure has a big following now with good reason by the sounds!

Nice additions to the car paggaz, sounds like your enjoying the cars new found potential

And don't worry, everyone's list of mod grows when jumping on here

[paggaz]

Officially been lipped

[libz05]

Officially been lipped

looking sexy there mate
genuine lip or ultrex?

[paggaz]

Thanks mate neither, I forgot what brand it is but it was from the group buy on here of replica lips

[libz05]

oh icic!! was it a recent group buy ???
was it for the post face or preface models?

[libz05]

oh and also how much did you pay /

[paggaz]

Yeah it was a recent group buy, closed about a fortnight ago. It was both pre facelift and post facelift, I believe all of the preface models sold out though. Here's the link to the GB- viewtopic.php?f=46&t=18224
Paid $175 + $21 posted to Canberra. Fitment was pretty good...just needed a few extra screws to hold it tightly against the bar and it needs something to hold the sides firmly. Can live without it being perfect though and for the price I'm very happy with it!

[zch91]

Yeah it was a recent group buy, closed about a fortnight ago. It was both pre facelift and post facelift, I believe all of the preface models sold out though. Here's the link to the GB- viewtopic.php?f=46&t=18224
Paid $175 + $21 posted to Canberra. Fitment was pretty good...just needed a few extra screws to hold it tightly against the bar and it needs something to hold the sides firmly. Can live without it being perfect though and for the price I'm very happy with it!

1 PreFL and 4 PostFL left according to the most recent post. Get on it quick

[paggaz]

Small update from last week:



Tein S-Tech springs installed onto my Billies last week. (cheers Reuben) Photo taken in a driveway because it hides the bumsag.

Love the new height, about a 1.5" drop, more in the rear, the front should settle slightly more. Nice and low but not impractical. The ride is slightly firmer but not harsh.
Just need to sort out spacers for the rear, because currently my exhaust at lowest point is sitting 85mm from the ground. I'll be going slightly more than 6mm spacers to counter balance the weight which I usually have in the boot.

[cruisn]

Any more than 6mm spacers in the rear and you'll need longer rear strut bolts.

[bigBADbenny]

If you can't get the bits locally : http://www.paranoidfabrications.com/sho ... ru-legacy/

[paggaz]

Thanks Ben! I guess Paranoid Fabrications are in US?

I've been giving the Liberty some lovin lately
- Spent a good 5 hours doing exterior detailing - wash, claybar (Meguiars), polish and wax (Autoglym).
- Premium ACT white on black number plates

Also did my "P-off" driver awareness and safety course in ACT which gives me four more points on my P-licence and no requirement to display P plates. No more extra unwanted cop attention

Unfortunately the only camera I had after the detailing job was my phone but you can see it's new ride height with the S-Techs.