Bezzza wrote:I would ideally have them as below Benny:
Both drain valves facing the front.
1/2" diameter on the right with both nipples facing forward.
3/4" on the left with the nipples at 45' degrees away from centre of the two cans.
Sides and directions given if you are looking at the cans from the front.
This will allow you to mount them in a front back orientation off the battery mount
Thanks for the info . The possible group buy for these ( viewtopic.php?f=56&t=29534 ) seems dead. So with all the info gathered, I'll be able to put in an order myself.
Did you order hoses from Saikou Michi, or where would you suggest getting some from (incl everything else eg elbow pieces)?