Member Profile - Bezzza

Show off what mods you've done to your car.

Member Profile - Bezzza

Postby Bezzza » Sat Jun 23, 2012 1:55 pm

Hello all!

After spending the last year in a MY08 NA 2.5i i decided to upgrade.
Upgraded rather nicely to a MY08 tbSTi Wagon 5AT :D To say i have been enjoying the last week driving around would be a gross understatement!!

Anyways enough of the jibba jabba now to the goodies / future goodies on the car.


MODS LIST:

INTERIOR:
Factory OEM Sat-Nav
DAMD Flat bottom steering wheel - Red Stitching
LED replacements for map, dome & boot.
Black Prova Si Drive Knob
Re-Upholstered centre console lid with red stitching
Group Buy 3D Floor Mats


EXTERIOR:
LED replacements parkers, fog lights, reverse, number plate lights
6000k Low Beam
Valenti LED rear lights
Cyber-R Big Bulge Scoop
OEM Mud Flaps
OEM slimline weathershields
Custom Plates - White on Black


HANDLING / WHEELS / BRAKES :
Enkei RPF1 - Silver 18x8 +35
Bridgestone RE050a and RE002 in 225/40/18
Shockworks Coilovers
Front = 350mm centre hub to arch
Rear = 355mm centre hub to arch
White line KCA313 Correction Kit
Whiteline KCA334 ALK Front Kit
Whiteline KCA339 Rear Camber Bolts
Whiteline Rear Swaybar 22mm - Adjustable
Whiteline Front Swaybar 22mm - Fixed
Whiteline Adjustable Endlinks F&R
AVO HD Rear Swaybar Mounts
Project MU NS400 pads F&R
DBA T3 Slotted Rotors - Front & Rear


ENGINE BAY / EXHAUST / PERFORMANCE:
Kido Tuned
Invidia Aus Spec Dump Pipe
Fujitsubo Cat-Back Exhaust
ProcessWest TMIC
HKS Super Hybrid Panel Filter
Turbosmart Kompact Plum Back BOV
Perrin Silicone SFB @ Turbo Inlet hoses
Cusco MBC Stopper
Cusco Radiator Shroud
STi Radiator Caps
STi Magnesium Oil Cap
JDM Battery and ABS Covers
Torque Solutions Billet Pitch Stop
Torque Solutions Engine mounts
Grimmspeed 3-Port BCS
Saikou Michi S1-DC3 twin OCC's


FUTURE MODS:
Cosmetics:
Delta speed side/rear skirts
JDM Rear bar - thin lip goodness
Brembo Re-Paint
Vinyl Wrap/Re-Spray
Red front seatbelt webbing

Performance:
COBB Performance CAI
Upgrade turbo


PICTURES:

Image

Image

Image

Image
Last edited by Bezzza on Mon Oct 12, 2015 2:15 pm, edited 97 times in total.
mod -> tune -> drive -> get bored -> repeat...
User avatar
Bezzza
 
Posts: 721
Joined: Sun Feb 05, 2012 11:08 pm
Location: Perth, Western Australia
Car: MY08 tb STi Wagon, 5AT
Real name: Ian
Profile URL: viewtopic.php?f=10&t=17319

Member Profile - Bezzza

Postby JDGT05 » Sat Jun 23, 2012 1:59 pm

Love it mate good work! Was this one from a member on here?
Now driving the mighty 86 :)
User avatar
JDGT05
 
Posts: 1206
Joined: Thu Sep 29, 2011 1:37 pm
Location: Perth
Car: STI Spec Forester
Real name: James
Profile URL: viewtopic.php?f=10&t=14065

Re: Member Profile - Bezzza

Postby Bezzza » Sat Jun 23, 2012 2:03 pm

Yeh was OllieJ's old car.

If you are down at the next meet may have to get you to take some proper shots of the car not from a phone haha!
mod -> tune -> drive -> get bored -> repeat...
User avatar
Bezzza
 
Posts: 721
Joined: Sun Feb 05, 2012 11:08 pm
Location: Perth, Western Australia
Car: MY08 tb STi Wagon, 5AT
Real name: Ian
Profile URL: viewtopic.php?f=10&t=17319

Re: Member Profile - Bezzza

Postby Digital » Sat Jun 23, 2012 2:16 pm

I hope to make this upgrade one day!

Nice
MY08 2.5i - Satin Pearl White - Sat Nav [TEAM WHITE]
User avatar
Digital
-stickered-
 
Posts: 1082
Joined: Thu Mar 27, 2008 8:14 pm
Location: Melbourne, VIC
Car: MY08 2.5i Sedan - TEAM WHITE
Real name: Bobby
Profile URL: viewtopic.php?f=10&t=5767&start=0

Re: Member Profile - Bezzza

Postby champ » Sat Jun 23, 2012 5:39 pm

I take the visiting rellies out to lunch, and in that time you've scored olliej's car :wink: :lol:

Congrats to you both! :mrgreen:
User avatar
champ
-stickered-
 
Posts: 1303
Joined: Sun Aug 01, 2010 9:49 pm
Location: Joondalup, WA
Car: MY07 GT Spec.B Tuned by STi 6MT OBP
Real name: Ian

Re: Member Profile - Bezzza

Postby bigBADbenny » Sat Jun 23, 2012 6:22 pm

Tasty wag! :mrgreen:
User avatar
bigBADbenny
 
Posts: 8228
Joined: Tue Oct 04, 2011 6:36 pm
Location: Collingwood, Melbourne
Car: MY07 GT-B 6MT OBP Wagon
Real name: Ben Richards
Profile URL: http://tinyurl.com/agvbzop

Re: Member Profile - Bezzza

Postby Bezzza » Sat Jun 23, 2012 8:39 pm

champ wrote:I take the visiting rellies out to lunch, and in that time you've scored olliej's car :wink: :lol:

Congrats to you both! :mrgreen:


A lot can happen in a short space of time can't it! :D

The upgrade is a must digital, nothing better than getting sucked into the seat when the turbo kicks in haha!
mod -> tune -> drive -> get bored -> repeat...
User avatar
Bezzza
 
Posts: 721
Joined: Sun Feb 05, 2012 11:08 pm
Location: Perth, Western Australia
Car: MY08 tb STi Wagon, 5AT
Real name: Ian
Profile URL: viewtopic.php?f=10&t=17319

Member Profile - Bezzza

Postby agan » Sat Jun 23, 2012 9:15 pm

Nice work bezza :)
MY08 GT Spec.B Diamond Grey Sedan
User avatar
agan
 
Posts: 1085
Joined: Fri Apr 09, 2010 11:32 pm
Location: Perth, WA
Car: MY08 GT Spec.B Sedan
Real name: patrick
Profile URL: viewtopic.php?f=10&t=18369

Re: Member Profile - Bezzza

Postby olliej » Sat Jun 23, 2012 9:34 pm

Looking good! Was/is a great set of wheels

If you need the stock mid pipe for the new muffs ive still got it, the fujitsubo mid pipe is bespoke for its muffs.
My08 Liberty GT Tuned by STI in Diamond Grey - Previous Libos: 2004 Safety Pack Wagon & 2004 Liberty GT Premium Pack
User avatar
olliej
 
Posts: 150
Joined: Sat May 10, 2008 1:51 pm
Location: Perth
Car: 2008 tb sti wagon in diamond grey

Re: Member Profile - Bezzza

Postby Bezzza » Sat Jun 23, 2012 9:43 pm

Mm I may possibly Ollie.
Not a certain to get them as yet but it's a possible.
The fujitsubo has a nice note, not too loud nor too soft :)
mod -> tune -> drive -> get bored -> repeat...
User avatar
Bezzza
 
Posts: 721
Joined: Sun Feb 05, 2012 11:08 pm
Location: Perth, Western Australia
Car: MY08 tb STi Wagon, 5AT
Real name: Ian
Profile URL: viewtopic.php?f=10&t=17319

Re: Member Profile - Bezzza

Postby jslayz » Sat Jun 23, 2012 10:11 pm

Congrats Ian, looking forward to seeing this in the metal :)
CURRENT - ATP GTX 3576 - 22psi - 283.7awkw
OLD - Dom 1.5Xtr - Last dyno 254ahkw, previous 238ahkw, first 224awkw.
My journey thread: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523
My Lib Pics here: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523&start=570#p370656
User avatar
jslayz
 
Posts: 2810
Joined: Tue Mar 09, 2010 11:32 pm
Location: Perthhhhhh
Car: 2005 Liberty GT Wagon
Real name: J

Re: Member Profile - Bezzza

Postby Bezzza » Fri Jun 29, 2012 6:30 pm

Most important mod went on the car today, club.liberty sticker in stealth charcoal!

Image

Also am waiting on Whiteline ALK, engine mounts and billet alloy pitch stop brace to arrive.
Hoping will make the car a little more stable and less movement.

Post up how it all goes once installed :)
mod -> tune -> drive -> get bored -> repeat...
User avatar
Bezzza
 
Posts: 721
Joined: Sun Feb 05, 2012 11:08 pm
Location: Perth, Western Australia
Car: MY08 tb STi Wagon, 5AT
Real name: Ian
Profile URL: viewtopic.php?f=10&t=17319

Re: Member Profile - Bezzza

Postby Bezzza » Thu Aug 16, 2012 4:32 pm

Alright guys looking for some advice.

Planning on pulling off the front bumper/lights to black out this inside this weekend (finally some sunny weather!!!).

Going to do the oven method to release the sticky seal of the lights.
Any idea what temp to do it at? 100C be too much? How long to leave in there?

Also will i need any extra sealant when placing back together or just back in the oven to soften up and whack together?

Please help really don't want this to go wrong haha!
mod -> tune -> drive -> get bored -> repeat...
User avatar
Bezzza
 
Posts: 721
Joined: Sun Feb 05, 2012 11:08 pm
Location: Perth, Western Australia
Car: MY08 tb STi Wagon, 5AT
Real name: Ian
Profile URL: viewtopic.php?f=10&t=17319

Re: Member Profile - Bezzza

Postby JDGT05 » Thu Aug 16, 2012 4:57 pm

Bezzza wrote:Alright guys looking for some advice.

Planning on pulling off the front bumper/lights to black out this inside this weekend (finally some sunny weather!!!).

Going to do the oven method to release the sticky seal of the lights.
Any idea what temp to do it at? 100C be too much? How long to leave in there?

Also will i need any extra sealant when placing back together or just back in the oven to soften up and whack together?

Please help really don't want this to go wrong haha!


Think there is a thread somewhere on this forum as a DIY walkthough, if not HKS180 would be your man to pm regarding anything lights!

good luck and be sure to post pics!
Now driving the mighty 86 :)
User avatar
JDGT05
 
Posts: 1206
Joined: Thu Sep 29, 2011 1:37 pm
Location: Perth
Car: STI Spec Forester
Real name: James
Profile URL: viewtopic.php?f=10&t=14065

Re: Member Profile - Bezzza

Postby Bezzza » Thu Aug 16, 2012 5:21 pm

I have had a poke around but can't seem to find much as far as walkthroughs :s

Might shoot Leo a pm is a good idea, see how he is doing his halo installs
mod -> tune -> drive -> get bored -> repeat...
User avatar
Bezzza
 
Posts: 721
Joined: Sun Feb 05, 2012 11:08 pm
Location: Perth, Western Australia
Car: MY08 tb STi Wagon, 5AT
Real name: Ian
Profile URL: viewtopic.php?f=10&t=17319

Next

Return to Post your mods

Who is online

Users browsing this forum: No registered users and 3 guests