Page 1 of 12

Member profile Da4sti3

PostPosted: Sat Mar 24, 2012 12:17 pm
by Da4sti3
Hey everyone I'm Daniel I own a 2005 Liberty 2.5i. Here it is in its stock condition

Image



THIS IS MY MOD LIST

Changed gear knob for a sparco gear knob in silver.
Tinted the windows all round 35% black.
Changed Parker globes to white LEDs
Removed Air Box Resonator
Air filter replaced with k&n hi flow filter
Changed all interior globes to LEDs
Ultrex Classic rims 18x8 +42
Nitto Neogens 225/40/18
XX premium black number plates
Custom modified grill built by myself
Dual mass flywheel removed and replaced with single flywheel by S&J Auto
Rolled rear guards by S&J Auto
K&T Automotive stage 2 paint correction and opti coat
Cusco rear sway bar and AVO hd mounts
Leos 6000k HID kit Low Beam
1m LED strip installed in boot


Image

Heres a photo of the grill after i painted it


Image

My Ultrex Classics 18x8 with Nitto Neo Gens

Image

Custom Grill and new plates

Image

Nice and Clean after stage 2 paint correction and opti coat

Image

Painted lettering on my tyres for something different


Current plans for the car...

[b]Cusco front sway bar
Front cusco strut brace
Interior Re Trim in leather
Sound System Install

Re: Member profile Da4sti3

PostPosted: Sat Mar 24, 2012 2:08 pm
by d-chang
Welcome to the forums mate!

Good to see another Daniel, with a similar car to mine! haha!

An exhaust upgrade is always a good move...does make it sound nicer! Video of my car can be seen in one of the threads... can't remember which one... think its the XForce System one.. Mine is only the 2.0R though, so yours being a 2.5, will have more depth!

How did you do your CAI mod? Did you have to remove anything and how did you do it?

Re: Member profile Da4sti3

PostPosted: Sat Mar 24, 2012 2:13 pm
by Da4sti3
I haven't done a CAI mod yet unless ur talking about removing the resonator ?

Re: Member profile Da4sti3

PostPosted: Sat Mar 24, 2012 2:20 pm
by d-chang
Da4sti3 wrote:I haven't done a CAI mod yet unless ur talking about removing the resonator ?


Yes! Thats what I meant... ahahha! Did you notice much of a difference??

Re: Member profile Da4sti3

PostPosted: Sat Mar 24, 2012 2:31 pm
by Da4sti3
I actually did that mod this morning so I havent really tested it.
Initially after having the car running for 5 minutes after I done it I didnt notice any change in "induction sound" even with my ear down as close to the box as possible
I then took it for a quick 10 minute drive honestly couldnt tell that I had done anything. Im certain tho the extra air flow is probably beneficial for the car but not enough to consider it a performance upgrade.

A hi flow filter will probably make a difference Ill look into getting one I think

Re: Member profile Da4sti3

PostPosted: Sat Mar 24, 2012 2:53 pm
by Da4sti3
This is my car in the condition i brought it in..

[url]Image[/url]

Re: Member profile Da4sti3

PostPosted: Sat Mar 24, 2012 3:26 pm
by d-chang
That looks nice! Wow red, haven't seen any red Libertys around!! Your car looks identical to mine! haha!

Mine is here:
viewtopic.php?f=7&t=15749

Yeah I already fitted a K&N panel so hopefully I get the cool induction noise! :D

Re: Member profile Da4sti3

PostPosted: Sat Mar 24, 2012 3:33 pm
by Da4sti3
There is a thread in the How to Section which shows you how to remove the resonator. I cant be sure but its probably very similar to my car. U should be able to figure it out using the info on that thread !

Re: Member profile Da4sti3

PostPosted: Sun Mar 25, 2012 10:15 am
by Da4sti3
UPDATE: On removal of resonator
After taking the lib for a long drive last night I noticed that the car is running slightly cooler than normal

This is a good thing the temp gauge is slightly below where it normally sits.

Member profile Da4sti3

PostPosted: Sun Mar 25, 2012 11:00 am
by JDGT05
Finally another red lib!

Re: Member profile Da4sti3

PostPosted: Tue Mar 27, 2012 6:35 am
by Da4sti3
Ok just made some new purchases I've got a set of interior LEDs coming from Leo aka hks180 will post a pic when I get them
And also should have a k&n panel filter by next week
Hopefully that will give me some induction noise and a deeper exhaust note.

Re: Member profile Da4sti3

PostPosted: Tue Mar 27, 2012 8:38 am
by hamish_023
Welcome Daniel

Re: Member profile Da4sti3

PostPosted: Wed Mar 28, 2012 6:20 pm
by Da4sti3
this pic is of some damage im getting repaired thru insurance i was gonna pay for it myself but got qouted $2800 which is ridiculous
went through insurance paying 400 instead. much better on the wallet !![url]Image[/url]

Re: Member profile Da4sti3

PostPosted: Fri Mar 30, 2012 9:46 am
by Da4sti3
I received my interior lights from Leo today will put them in over the weekend and post pics

Re: Member profile Da4sti3

PostPosted: Fri Mar 30, 2012 2:28 pm
by Alureous
Is the damage just on the door, or is there damage to the quarter panel as well? Hard to tell.