[ITS-STI]
Posted: Mon Feb 06, 2012 9:08 pmModification List for my 2007 Generation Four Series Two Subaru Liberty GT Spec. B Tuned By STi also known as [ITS-STI]...
Car:
2007 Generation Four Series Two Subaru Liberty GT Spec. B Tuned By STi
Limited Edition Number:
300 of 300
Colour:
Obsidian Black Pearl
Transmission:
Six Speed Manual
Number Plates:
[ITS-STI]
Pictures:
Modifications:
Induction:
"Phat" Front Mount Intercooler Piping Kit sent to Sam from All Chrome Bits to have the Pipes Polished and have the Welds Linished for a neater look with the addition of a Just Jap 535mm x 335mm x 65mm Bar and Plate Intercooler Core... This size was selected to have the utmost minimum modification to the front bar...
Sold!
I have decided to go with the HKS Racing Suction Reloaded matched up with the HKS Carbon Air Intake Duct as the suction sound it produces can not be beat!
Sold!
Custom "Phat" Turbo Inlet Pipe...
Coming Soon!
Tomei Arms M8265 450hp Turbo...
Coming Soon!
Go Fast Bits "Respons" Blow Off Valve (I know it's not my usual J.D.M option but it's stealth and sits nice in the standard location)
Exhaust:
Tomei "Expreme" equal length exhaust manifold!
It has a three inch "Phat" mild steel ceramic coated dump pipe, a three inch stainless steel HKS "ES Premium" cat back ... I will retract my previous cannon statement as i think they fall into this category unfortunately... But at the end of the day it is the quality of workmanship and the mild sound this exhaust produces!
Fuel Management:
Injector Dynamics 1000cc Injectors...
Sard In Tank 300 L/PH Fuel Pump...
Coming Soon!
Suspension:
Coilovers of choice are a set of HKS Hipermax III Boxer's Balance... The reason for having selected non adjustable camber tops was for ride comfort and minimum noise... Also, these allow to be adjusted one degree all around which is more than enough...
Cusco front and rear Sway Bars, Cusco heavy duty rear sway bar Mounts and Cusco Solid End Links...
Wheels & Tyres:
18" x 8" +35 Inch Work VS-TX Mesh which are limited and discontinued and are individually numbered with a plaque on the face edge matched with 225/40 Falken Azenis RT615 Semi Slicks... FAIL!
18" x 8.5" Rota Grid
19" x 7.5" +45 Kahn RS-V
Sold!
Miscellaneous:
McGuard STi wheel nuts...
Billion Silicone Radiator Hoses...
Cheers, Nick a.k.a [ITS-STI]
Car:
2007 Generation Four Series Two Subaru Liberty GT Spec. B Tuned By STi
Limited Edition Number:
300 of 300
Colour:
Obsidian Black Pearl
Transmission:
Six Speed Manual
Number Plates:
[ITS-STI]
Pictures:
Modifications:
Induction:
"Phat" Front Mount Intercooler Piping Kit sent to Sam from All Chrome Bits to have the Pipes Polished and have the Welds Linished for a neater look with the addition of a Just Jap 535mm x 335mm x 65mm Bar and Plate Intercooler Core... This size was selected to have the utmost minimum modification to the front bar...
Sold!
I have decided to go with the HKS Racing Suction Reloaded matched up with the HKS Carbon Air Intake Duct as the suction sound it produces can not be beat!
Sold!
Custom "Phat" Turbo Inlet Pipe...
Coming Soon!
Tomei Arms M8265 450hp Turbo...
Coming Soon!
Go Fast Bits "Respons" Blow Off Valve (I know it's not my usual J.D.M option but it's stealth and sits nice in the standard location)
Exhaust:
Tomei "Expreme" equal length exhaust manifold!
It has a three inch "Phat" mild steel ceramic coated dump pipe, a three inch stainless steel HKS "ES Premium" cat back ... I will retract my previous cannon statement as i think they fall into this category unfortunately... But at the end of the day it is the quality of workmanship and the mild sound this exhaust produces!
Fuel Management:
Injector Dynamics 1000cc Injectors...
Sard In Tank 300 L/PH Fuel Pump...
Coming Soon!
Suspension:
Coilovers of choice are a set of HKS Hipermax III Boxer's Balance... The reason for having selected non adjustable camber tops was for ride comfort and minimum noise... Also, these allow to be adjusted one degree all around which is more than enough...
Cusco front and rear Sway Bars, Cusco heavy duty rear sway bar Mounts and Cusco Solid End Links...
Wheels & Tyres:
18" x 8" +35 Inch Work VS-TX Mesh which are limited and discontinued and are individually numbered with a plaque on the face edge matched with 225/40 Falken Azenis RT615 Semi Slicks... FAIL!
18" x 8.5" Rota Grid
19" x 7.5" +45 Kahn RS-V
Sold!
Miscellaneous:
McGuard STi wheel nuts...
Billion Silicone Radiator Hoses...
Cheers, Nick a.k.a [ITS-STI]
