club.liberty.asn.au

Hi everyone,

Thought I better update in a thread instead of cluttering up the forum with a giant signature:

2005 Liberty GT Wagon - 6MT

Fitted:

Suspension/Bracing:
BSF30Z Sway bar - 22mm heavy duty blade adjustable
BSR39Z Sway bar - 20mm heavy duty blade adjustable
KLC139 Sway bar - link kit heavy duty adj steel ball
KLC144 Sway bar - link kit heavy duty adj steel ball
KTA124 Camber/toe correction arm - complete lower control arm assembly
KCA307 Toe - lock bolt kit
AVO HD Rear sways bar mounts.
Cusco front strut bar
Whiteline HD steering rack bushing kit
Ohlins DFV Coilovers - With Eibach 7kg Fronts & 9kg Backs
Whiteline antilift kit & LCA bushes
Whiteline diff and outrigger bushes - KDT905, KDT906

Brakes:
Braided Brake lines from Group buy
STI Brembos & DBA rotors, ClubSpec 5000 F & 2657 T2 R
Project Mu HC+ pads

Wheels:
225/40/18 Yokohama AD08R
Rays Volk Racing G25s 18 x 8.5 44offset
Alloy 56.1/65mm hub rings

Cosmetics:
DAMD Front vented fenders
DAMD rear side extensions
DAMD rear underbody spoiler
JDM rear bar
18% Tint on rear, cargo and hatch windows
Corazon Front grill
Towbar removed
Custom modded front bar to suit WTA heat exchanger

Lighting:
Valenti Smoked LED Tail lights
Interior lights are LED
LED Number plate lights on Hatch
6000K HID low beams
6500k LED parkers
Narva Plus 100 high beams

Exhaust:
Killer B 321 alloy holy headers and uppipe - V3 cast collector
Prestige Exhaust Custom Stainless TBE - Custom 3.5inch Dump with 2.25inch rear section after the Y, 2 x350mm long, oval, side in/center out oval SMB mufflers for rears
Biffa Engineering Twin 2.25inch center pipe, twin 4 inch Magnaflow mufflers

Engine: Reworked by All Star Garage
2.5L EJ257 2008 STI motor
Darton sleeves & deck insert
Water pump with cast impellor
Cosworth Oil pump
Heads ported
1mm larger intake & exhaust valves fitted
Killer B Sump
Killer B sump baffle
Killer B Oil pickup
ATP 3576 Turbo - Stock location
Grimmspeed 3 Port Boost Solenoid
ID Top Feed Rail kit & ID 1000's
Aeromotive 11165 as lift and Process West Billet F6 Fuel surge tank with Walbro 460 pump inside (Custom mount)
Tomei Fuel Pressure regulator & Pressure Gauge
Fuel injector conversion electric plugs
Manley Turbo Tuff 79mm Crank
Manley Turbo Tuff I Beams with ARP 625+Custom Age Rod bolts
Cosworth Forged Pistons
Cosworth Bearings
ARP 625+Custom Age Head Studs 260-4704
Kelford 220C Cams
Kelford Titanium retainers & 1847 BT Valve springs
WTA Kit FrozenBoost = Type 26 intercooler & Type 101 Heat Exchanger Bosch Cobra pump & silicone lines.
AVO Silicone intake
Process west CAI in guard
Omni Power 4 Bar MAP Sensor Legacy GT 2005-2009 OMN MAP-SUP-4BAR
Saikou Michi twin Catch can setup
8mm Grimmspeed Phenolic spacers

Transmission:
6MT ex 3.0RB + new Exedy HD clutch & SMFlywheel

Gauges/Data:
Innovate MTX-D Exhaust Gas Temp Gauge Kit
Innovate MTX-L AFR Gauge Kit
Innovate MTX-D Vacuum / Boost & Shift Light Gauge Kit
Innovate MTX-D Oil Pressure & Temperature Gauge Kit
Carbon Fibre Autometer Cups

Alloy KoyoRad race Radiator installed

Installed the GM IAT Sensor after the WTAIC

Kido tuned

To do:
Add Oil cooler
Relocate and re-duct a new WTA Heat exchanger
New stock front bar on
Paint front bar, bonnet & front guards & rear spoiler


Thanks for looking,

J

Nice list of mods, but come on...no pics?

What is this, a member profile for ants? This needs at least 3 times more pictures.

chaotic2050 wrote:This needs at least 3 times more pictures.

3x0=0

Found some pictures of his car batman internet stalking styez yo

hamish_023 wrote:

chaotic2050 wrote:This needs at least 3 times more pictures.

3x0=0

Hurr Durr Zoolander reference

Hahah, I do plan on taking some current pics, soon as I can get it presentable.

Bit embarrassing, got my side extensions on and no rear underbody installed (bloody doesn't fit), looks silly at the moment.

Trying to work out why the rear underbody doesnt fit. Going on hoist tomorrow to see if we can sort it out.

Looks like it would fit a sedan.....weird, gonna test fit it on a sedan soon.

J

Update (painful word!?!?)

Took delivery this week of a CyberR Big Bulge Bonnet scoop and a Corazon Front Grill.
Can't wait to get them back from painters!!

Need a particular rear bumper with the small ledge, 57704G040 is the number.
Checking with Subaru here and in Japan.
Once I have one then the rear underbody can go on and I'll get photos up.

J

jslayz wrote:Update (painful word!?!?)

Took delivery this week of a CyberR Big Bulge Bonnet scoop and a Corazon Front Grill.
Can't wait to get them back from painters!!

Need a particular rear bumper with the small ledge, 57704G040 is the number.
Checking with Subaru here and in Japan.
Once I have one then the rear underbody can go on and I'll get photos up.

J

I'm looking at that part aswell.Its on japanparts Part no: 107-004-009.

jslayz wrote:Update (painful word!?!?)

Har har! Arse joke!

(Just demonstrating my maturity)

jslayz wrote:Update (painful word!?!?)


Need a particular rear bumper with the small ledge, 57704G040 is the number.
Checking with Subaru here and in Japan.
Once I have one then the rear underbody can go on and I'll get photos up.

J

this is the problem when buying a part form an online vendor that has limited knowledge about what fits and what does not

you eighter need a Jap spec rear bar or cut and extend the rear pods (extend is the cheapest way)

also ordering corazon (and others) parts painted is cheaper than having them painted here eg; grill will cost $50-60 extra painted and you know the colour will match and you get to fit it right out of the box

cliffo3rb wrote:

jslayz wrote:Update (painful word!?!?)

Took delivery this week of a CyberR Big Bulge Bonnet scoop and a Corazon Front Grill.
Can't wait to get them back from painters!!

Need a particular rear bumper with the small ledge, 57704G040 is the number.
Checking with Subaru here and in Japan.
Once I have one then the rear underbody can go on and I'll get photos up.

J

I'm looking at that part aswell.Its on japanparts Part no: 107-004-009.

Nope I have already got this one below, painted and ready to go on:

PHAT GT wrote:

jslayz wrote:Update (painful word!?!?)


Need a particular rear bumper with the small ledge, 57704G040 is the number.
Checking with Subaru here and in Japan.
Once I have one then the rear underbody can go on and I'll get photos up.

J

this is the problem when buying a part form an online vendor that has limited knowledge about what fits and what does not

you eighter need a Jap spec rear bar or cut and extend the rear pods (extend is the cheapest way)

also ordering corazon (and others) parts painted is cheaper than having them painted here eg; grill will cost $50-60 extra painted and you know the colour will match and you get to fit it right out of the box

I have the correct new painted rear bar on the way and all the mounting hardware to make sure it fits plus I'm missing some clips n bits anyway.

I ordered my corazon grill painted so my spraypainter can easily put the same black/silverflake/clear finish on it as on my side extensions and rear underbody.

Hey Phat hows the ikeya Formula adjustable rear control arms I emailed you about going??
Need them soon please

Cheers

J

0rdered some of these:



Cant wait,

J

jslayz wrote:0rdered some of these:



Cant wait,

J

Hi J its going to look good. Are you going to change the front bar to accommodate the front fenders, and where did you order the fenders from

I can't see what is it you ordered or is that just my tapatalk playing up?