JSLAYZ - 283awkw pics pg 39,41,53,55,63

Show off what mods you've done to your car.

Re: JSLAYZ - Updated pics pg 39,41,53,55,63

Postby jslayz » Thu Sep 22, 2016 12:33 am

Matt fixed me up with a manual tune rom that works in my car.
No flashing cruise or odometer errors or check engine light.
All good

Thanks Matt
CURRENT - ATP GTX 3576 - 22psi - 283.7awkw
OLD - Dom 1.5Xtr - Last dyno 254ahkw, previous 238ahkw, first 224awkw.
My journey thread: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523
My Lib Pics here: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523&start=570#p370656
User avatar
jslayz
 
Posts: 2810
Joined: Tue Mar 09, 2010 11:32 pm
Location: Perthhhhhh
Car: 2005 Liberty GT Wagon
Real name: J

Re: JSLAYZ - Updated pics pg 39,41,53,55,63

Postby jslayz » Tue Oct 11, 2016 1:17 am

So the to do list is getting smaller, across Christmas it will get much smaller again

Center console trim - Waiting for my Redline shift boot, handbrake and console lid to come
Replace Radiator.
Relocate and re-duct the WTA Heat exchanger (Doing this instead of front mount for now as could lose 1000rpms spool here......)
Install the GM IAT Sensor after the WTAIC
Retune SD

Loving the manual so far.
CURRENT - ATP GTX 3576 - 22psi - 283.7awkw
OLD - Dom 1.5Xtr - Last dyno 254ahkw, previous 238ahkw, first 224awkw.
My journey thread: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523
My Lib Pics here: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523&start=570#p370656
User avatar
jslayz
 
Posts: 2810
Joined: Tue Mar 09, 2010 11:32 pm
Location: Perthhhhhh
Car: 2005 Liberty GT Wagon
Real name: J

Re: JSLAYZ - Updated pics pg 39,41,53,55,63

Postby KelvinTaylor88 » Tue Oct 11, 2016 11:09 am

Loving the progress mate, huge transformation :good:
2006 Subaru Liberty 3.0R Spec B Urban Grey Metallic
Tuned, Raptor Headers, K2 Gear Spec Neo Catback, HKS ES Premium Ti Limited Mufflers, Shockworks Coilovers, Rays 57 Pro w/ Titanium Lip, Advan AD08R, JDM Front End w/ Zerosports Front Lip, Corazon Grille, Deltaspeed Side Skirts, Custom Headlights, Stickered, and more...

WTB: Diffuser, Subaru Badge, Brembos?
User avatar
KelvinTaylor88
 
Posts: 321
Joined: Mon Mar 24, 2014 9:41 pm
Location: Melbourne
Car: MY06 Liberty Spec-B Sedan
Real name: Kelvin
Profile URL: viewtopic.php?f=10&t=26710

Re: JSLAYZ - Updated pics pg 39,41,53,55,63

Postby applegeek897 » Wed Oct 12, 2016 2:06 am

Epic stuff man!
Daily: '00 Daihatsu Cuore "Kelly" - Build Thread -
Project / Weekender: '05 Subaru Liberty 3.0R-B Wagon - Build Thread -
Motorcycle: '14 Triumph Street Triple 660 - Build Thread -
User avatar
applegeek897
 
Posts: 246
Joined: Sun Jun 07, 2015 1:02 am
Location: Sydney, NSW
Car: 05' 3R-B Wagon, 00' Daihatsu Cuore
Real name: James
Profile URL: viewtopic.php?f=10&t=31247

Re: JSLAYZ - Updated pics pg 39,41,53,55,63

Postby jslayz » Wed Oct 12, 2016 10:31 pm

Thanks applegeek.

Hot afternoon today has confirmed that I will remove the WTA rather than muck with it.
Steady heat soak is unacceptable.

Amended 'to do' list is now

Center console trim - Waiting for my Redline shift boot, handbrake and console lid to come, Black alacantara with black stitching
Replace Radiator.
Install AVO FMIC, revise fuel system to allow.
Install the GM IAT Sensor after the FMIC. Reduct to suit.
Retune SD
CURRENT - ATP GTX 3576 - 22psi - 283.7awkw
OLD - Dom 1.5Xtr - Last dyno 254ahkw, previous 238ahkw, first 224awkw.
My journey thread: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523
My Lib Pics here: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523&start=570#p370656
User avatar
jslayz
 
Posts: 2810
Joined: Tue Mar 09, 2010 11:32 pm
Location: Perthhhhhh
Car: 2005 Liberty GT Wagon
Real name: J

Re: JSLAYZ - Updated pics pg 39,41,53,55,63

Postby jslayz » Mon Oct 17, 2016 10:58 pm

The big question is 2.5inch thick or 3.5 inch thick FMIC....???

Thinking 2.5 to get more flow and faster spool....

Keen to hear the forumers thoughts..... aaaand go!
CURRENT - ATP GTX 3576 - 22psi - 283.7awkw
OLD - Dom 1.5Xtr - Last dyno 254ahkw, previous 238ahkw, first 224awkw.
My journey thread: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523
My Lib Pics here: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523&start=570#p370656
User avatar
jslayz
 
Posts: 2810
Joined: Tue Mar 09, 2010 11:32 pm
Location: Perthhhhhh
Car: 2005 Liberty GT Wagon
Real name: J

Re: JSLAYZ - Updated pics pg 39,41,53,55,63

Postby dr20t » Tue Oct 18, 2016 6:06 am

3"

Go with tried and true. No need to reinvent the wheel with intercoolers. Stick to a plazmaman / Garrett / pwr core and you can't go wrong. Dont think the avo fmic is necessary.

Mick
Addicted to corn juice....

My FrankenStien build thread here: viewtopic.php?t=14137
User avatar
dr20t
 
Posts: 4191
Joined: Sun Oct 23, 2011 10:43 pm
Location: South West Sydney NSW
Car: 04 Liberty GT Auto
Real name: Mick
Profile URL: viewtopic.php?t=14137

Re: JSLAYZ - Updated pics pg 39,41,53,55,63

Postby jslayz » Wed Oct 19, 2016 1:33 am

dr20t wrote:3"

Go with tried and true. No need to reinvent the wheel with intercoolers. Stick to a plazmaman / Garrett / pwr core and you can't go wrong. Dont think the avo fmic is necessary.

Mick


Will need custom end tanks with those cores, think I have found where to get over here, fingers crossed.

When it is 20degrees or less it goes strong but over that.......not as hard.

Will pop up some pics when the big rework is underway.
CURRENT - ATP GTX 3576 - 22psi - 283.7awkw
OLD - Dom 1.5Xtr - Last dyno 254ahkw, previous 238ahkw, first 224awkw.
My journey thread: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523
My Lib Pics here: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523&start=570#p370656
User avatar
jslayz
 
Posts: 2810
Joined: Tue Mar 09, 2010 11:32 pm
Location: Perthhhhhh
Car: 2005 Liberty GT Wagon
Real name: J

Re: JSLAYZ - Updated pics pg 39,41,53,55,63

Postby jslayz » Sat Oct 29, 2016 1:50 am

ok, Wrapped some interiar and installed the Redline Alacantara handbrake cover and sift boot and center armrest cover.

Looks tidy. Was a beeeeeech to do as none of the Redline gear fit without customising it!

Image

Image

Image

Got here in the end, reduced some noise in the cabin so pretty good :D
CURRENT - ATP GTX 3576 - 22psi - 283.7awkw
OLD - Dom 1.5Xtr - Last dyno 254ahkw, previous 238ahkw, first 224awkw.
My journey thread: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523
My Lib Pics here: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523&start=570#p370656
User avatar
jslayz
 
Posts: 2810
Joined: Tue Mar 09, 2010 11:32 pm
Location: Perthhhhhh
Car: 2005 Liberty GT Wagon
Real name: J

Re: JSLAYZ - Updated pics pg 39,41,53,55,63

Postby applegeek897 » Sun Oct 30, 2016 7:45 pm

Yeah relinegoods do needs some adjustments to make it work, I wonder if it's because they templates they are using are possibly just flipped versions of the US cars. Looks great though.
Daily: '00 Daihatsu Cuore "Kelly" - Build Thread -
Project / Weekender: '05 Subaru Liberty 3.0R-B Wagon - Build Thread -
Motorcycle: '14 Triumph Street Triple 660 - Build Thread -
User avatar
applegeek897
 
Posts: 246
Joined: Sun Jun 07, 2015 1:02 am
Location: Sydney, NSW
Car: 05' 3R-B Wagon, 00' Daihatsu Cuore
Real name: James
Profile URL: viewtopic.php?f=10&t=31247

Re: JSLAYZ - Updated pics pg 39,41,53,55,63

Postby jslayz » Sun Oct 30, 2016 10:00 pm

Thanks James, looking forward to dyno on 18th Nov.
CURRENT - ATP GTX 3576 - 22psi - 283.7awkw
OLD - Dom 1.5Xtr - Last dyno 254ahkw, previous 238ahkw, first 224awkw.
My journey thread: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523
My Lib Pics here: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523&start=570#p370656
User avatar
jslayz
 
Posts: 2810
Joined: Tue Mar 09, 2010 11:32 pm
Location: Perthhhhhh
Car: 2005 Liberty GT Wagon
Real name: J

Re: JSLAYZ - Updated pics pg 39,41,53,55,63

Postby jslayz » Sun Oct 30, 2016 10:00 pm

Thanks James, looking forward to dyno on 18th Nov.
CURRENT - ATP GTX 3576 - 22psi - 283.7awkw
OLD - Dom 1.5Xtr - Last dyno 254ahkw, previous 238ahkw, first 224awkw.
My journey thread: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523
My Lib Pics here: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523&start=570#p370656
User avatar
jslayz
 
Posts: 2810
Joined: Tue Mar 09, 2010 11:32 pm
Location: Perthhhhhh
Car: 2005 Liberty GT Wagon
Real name: J

Re: JSLAYZ - Updated pics pg 39,41,53,55,63

Postby jslayz » Sun Oct 30, 2016 10:00 pm

Thanks James, looking forward to dyno on 18th Nov.
CURRENT - ATP GTX 3576 - 22psi - 283.7awkw
OLD - Dom 1.5Xtr - Last dyno 254ahkw, previous 238ahkw, first 224awkw.
My journey thread: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523
My Lib Pics here: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523&start=570#p370656
User avatar
jslayz
 
Posts: 2810
Joined: Tue Mar 09, 2010 11:32 pm
Location: Perthhhhhh
Car: 2005 Liberty GT Wagon
Real name: J

Re: JSLAYZ - Updated pics pg 39,41,53,55,63

Postby jslayz » Sun Oct 30, 2016 10:00 pm

Thanks James, looking forward to dyno on 18th Nov.
CURRENT - ATP GTX 3576 - 22psi - 283.7awkw
OLD - Dom 1.5Xtr - Last dyno 254ahkw, previous 238ahkw, first 224awkw.
My journey thread: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523
My Lib Pics here: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523&start=570#p370656
User avatar
jslayz
 
Posts: 2810
Joined: Tue Mar 09, 2010 11:32 pm
Location: Perthhhhhh
Car: 2005 Liberty GT Wagon
Real name: J

Re: JSLAYZ - Updated pics pg 39,41,53,55,63

Postby jslayz » Sun Oct 30, 2016 10:00 pm

Thanks James, looking forward to dyno on 18th Nov.
CURRENT - ATP GTX 3576 - 22psi - 283.7awkw
OLD - Dom 1.5Xtr - Last dyno 254ahkw, previous 238ahkw, first 224awkw.
My journey thread: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523
My Lib Pics here: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523&start=570#p370656
User avatar
jslayz
 
Posts: 2810
Joined: Tue Mar 09, 2010 11:32 pm
Location: Perthhhhhh
Car: 2005 Liberty GT Wagon
Real name: J

PreviousNext

Return to Post your mods

Who is online

Users browsing this forum: No registered users and 9 guests