club.liberty.asn.au

Name: Nigel (Nipple06)
Car: 2004 2.5i manual
Colour: dark red
History:First car - lernt to drive on a 06 xt foz (Manual)
Purchase date: March 2011 stock
So mods

Outside :
1.Window wipers wipetrex
2.mesh grill
3.Front lip Otr brand
4. Post facelift 2.5i wrapped in ku31
5.Tint 22%on the front 16% on the back and 10% on the sun roof

Lightinging
1.low beam hid's the 6000k
2. led parkers/number plate globes
3.6000k hid fogs
4. 24 led in the map lights with cutout and center dome hook up
5. 48 led's in the center dome and 24 in the boot
6. Hid reverse kit
7. dual halo"s and blacked out
8.chrome indicator globes
9.clear door lenses with led panel
10. Post facelift tail lights
11. hid hi beams

Interior
1. Out back leather seats
2.spec b centre console lid
3.k2 floor mats
4.Jdm fuze coin holder
5. gt wheel
6.resomat coming soon
7. new gear stick coming soon


Performance mods : heheh
1.V1 bc coilovers
2.hks air filter
3.blitz ac filter
4. resonator removal

Audio:
1.Focal speakers
2.Grom USB / Apple / Android / Bluetooth Box (U2P-SUB08)

Comming soon
1. Cs9 rims or maybe something else
2. Focal under seat sub and amp
3.black alcantara shift and handbrake boots
4. sway bars

Nice first car.

Please remove those rear bumper strips immediately!!

Very clean and in good nick

My lib is my very first car too also 1+ to what crusin said

cruisn wrote:Nice first car.

Please remove those rear bumper strips immediately!!

Yer i know there Funking ugly
Wont it remove the paint :/
I was planning on doing that but was told not to due to that fact :/
Hair dryer and fishing line ?

JKeep2.5i wrote:Very clean and in good nick

My lib is my very first car too also 1+ to what crusin said

More the photographs i took ... see the back right side passengers window is lighter ...

Finally another red lib

Nipple06 wrote:Wont it remove the paint :/
I was planning on doing that but was told not to due to that fact :/
Hair dryer and fishing line ?

It wont remove the paint.

Hairdryer and fishing line is the go. Then some turps or prepsol to remove the remaining double sided tape.

I did my mates '05 XT when he bought it in 2010. Didnt leave a mark.

ok thanks

Ok guys I'm fixing my head lights up soon so i'm thinking of doing a mesh grill thinking spending no more then $350 on that and halo's while i have the headlights open plus maybe some aftermarket horns for the look ... not to sure on that
So i have a question of what mesh grill do you think out of these two would you recommend or something else.
http://www.ebay.com.au/itm/Carbon-Fiber-Front-Grill-Subaru-Outback-Liberty-STI-/230610907922?pt=AU_Car_Parts_Accessories&hash=item35b17b3312
http://www.ebay.com.au/itm/SUBARU-LIBERTY-MY04-MY05-MY06-CARBON-FIBRE-FRONT-GRILL-/150663363054?pt=AU_Car_Parts_Accessories&hash=item23143c79ee

cruisn wrote:

Nipple06 wrote:Wont it remove the paint :/
I was planning on doing that but was told not to due to that fact :/
Hair dryer and fishing line ?

It wont remove the paint.

Hairdryer and fishing line is the go. Then some turps or prepsol to remove the remaining double sided tape.

I did my mates '05 XT when he bought it in 2010. Didnt leave a mark.

I did it there is a small out line that i need to get buffed out. looks alot better
Pic's updated .. no mods

Definitely needs to be black.. People have complaints about the fit and finish of Ultrex, haven't had an experience with their gear yet so it's all hearsay until someone else can confirm.. Why don't you make your own grill? I did at a cost of about $55 (add on to that the donor grill which was $70, but I have my stock one if I wanted to sell that and recoup some costs).

You really going to try angel eyes yourself??

i think the hardest part about the whole angle eyes idea is opening and sealing the lights up, and also the fact that you have to take off the whole front bar to take the lights off

Front bar comes off in 10mins and it takes about the same to heat and open up each headlight.

cruisn wrote:Front bar comes off in 10mins and it takes about the same to heat and open up each headlight.

well i have my test headlight $70 plus parts to fix broken clip and done the angel eyes on my mates bmw. so shouldnt be hard as i have taken the front bar off before isn't hard and headlight on my lib. baking isn't hard will do a thread on it looking at buying angel eyes tonight just tossing upbettween the led or cffl ring ones :/. think i will go the cffl rings.

Definitely CCFL.. You would see the individual diodes if you went for an LED set right?

Lib_seanmau5 wrote:Definitely CCFL.. You would see the individual diodes if you went for an LED set right?

yer but leds are brighter from what i have seen and more white where the ccfl rings ... Btw you need inside diameter need to be 110mm if anyone is interested.

Got my cables now waiting on halo's