club.liberty.asn.au

Name: Simon
Age: 19
Car: MY05 3.0R spec B Wagon
Colour: Obsidian Black Pearl
Purchase date: 24 June 2011 (Completely Stock)






The Never Ending List of Planned Mods

Interior Lighting

LED Map Lights - COMPLETED
LED Dome Lights - COMPLETED
LED Strip Footwell Lights - PURCHASED

Exterior Lighting

LED parkers - COMPLETED
PHILLIPS CRYSTAL VISION 4300k high beam - COMPLETED
5000K HID low beams - COMPLETED
5000K HID fog lights - COMPLETED
LED Footwell strips - COMPLETED
CHROME indicater lights - COMPLETED
T20 Cree Reverse lights - COMPLETED
CCFL 'Angel Eyes' Rings

Exterior Styling

Stickered - COMPLETED
Window Tint (20% Sides, 5% Rear window) - COMPLETED
Zerosports Grille - COMPLETED
'Hippo Sleek'Eyelids - COMPLETED
Outback Bonnet - COMPLETED
Hanabi style Tail Lights - COMPLETED
Rear De-badged - COMPLETED
JDM spec B Bar - COMPLETED
JDM Rear Bar - COMPLETED
Non Spec B Side Skirts - COMPLETED
Front Lip - COMPLETED
Delta Speed Side Lip - COMPLETED
Delta Speed Rear Lip - COMPLETED
Midwaist Spoiler - COMPLETED
Liberal Rear Wing - COMPLETED
KC Auto "Burnout" Fenders - COMPLETED

Interior Styling

Clear Door Courtesy Light Covers - COMPLETED
Carbon Wrap Center Console Strips - COMPLETED
Carbon Wrap Door Handles - 3/4 COMPLETED
Black Leather/Red Stitch Shift Boot - COMPLETED
Black Leather/Red Stitch Handbrake Boot
Black Leather/Red Stitching Steering Wheel Cover - PURCHASED
USDM Legacy Wagon Cargo Net - COMPLETED
STi Gear Knob
STi 6MT Pedals - COMPLETED[/color]
STi Side Sill Panels

In Car Entertainment

Dynamat
Anycar iPod Intergration Link - COMPLETED

Engine Bay Styling

JDM ABS Cover - COMPLETED[/color]
JDM Washer Cover - COMPLETED[/color]
STi Oil Cap - COMPLETED

Wheels

Neo Chrome Tuner Lug Nuts - COMPLETED

Brakes

Brembo's F&R in Verde Ithaca by cruisn - COMPLETED
RDA Slotted Rotors F&R - COMPLETED
Goodridge Braided Brake Lines - COMPLETED
Cusco Master Cyliner Brake Stopper - COMPLETED

Suspension

KiDo Coilovers - COMPLETED
HardRace LCA Bushes - COMPLETED
Whiteline Rear Sway Bar - COMPLETED
AVO HD Mounts - COMPLETED
Summit Racing Rear Strut Brace - COMPLETED
Ultrex Front Strut Brace - COMPLETED

Transmission

COBB 6 Speed Short Throw Shifter
Kartboy Transmission Mounts - PURCHASED
STi Short Shifter - COMPLETED

Intake and Exhaust

HKS Panel Filter - COMPLETED[/color]
Xforce Exhaust - COMPLETED
WRX/STI Wide Body Mufflers (Courtesy of BBB) - COMPLETED

Miscellaneous

Reverse Parking Sensors - PURCHASED
Rola Roof Racks - COMPLETED
Custom SH 30 RB Number Plates - COMPLETED

If anyone can think of something i should get, please tell me. im always open to new ideas

Nice, and welcome . I love the 3.0 front end with a lip.
I have a set of cs9's I'll be looking at selling in the early new year if your looking for some.
The H6 sounds great with a 2.25/2.5" exhaust too .

cheers, haha i think im on here more than facebook these days.
and oooh, i might be interested. are the the 18x7 or 7.5?
they do sound nice, a mate of mine owns another 3RB and im not sure what mufflers he has but it sure sounds nice.
the exhaust system is on my things to do list, but i know it wont happen for a long time

EDIT: and i have to agree with you, since ive put the lip on the front just looks complete now, i think thats how they should have come.
and after all the GT and the Spec B prefacelifts were the top of the range

They are 18x7 but can fit 225 tyres so you can still get some decent rubber on them. Also in that two pak silver over black color so they look epic. Im fairly sure they only did 300 sets in the 2 pak and the rest where just STD silver.


Exhaust wise, a good set up is x force center and Y pipe ($550) with TCP mufflers. ($650)
I'm a vendor on here for whiteline and x force gear so always roping people out with cheap pipes .

Same about facey, facey comes 2nd to lib forum.

i just went and scoped your wheels out, i love them! i think i might have to take them off you when you decide to part out

and ill hold you to it when im ready, for now (end of next year?) i might end up just upgrading the muffles to get a nice tone from her. the only reason it isnt on my list real soon is i do alot of hwy km's at the moment and i think i would get sick of the constant drone (but it is a subaru, no one can get sick of it )

Done, Rims are yours early next year.

Great thing about the x force center and Y pipe is there is no drone, there is a massive 14" long resonator on the center pipe. TCP mufflers will give you a amazing sound, I love them but have varex's myself as I wanted to be louder and more bark then TCP's and stealthy silent. All at a price though . Lol.

i like that idea, ill start keeping money aside for them

how much were the varex? PM me if you dont want to tell.
ive been looking at them for a few years (long time hot4's ready, really is a crap mag)

Haha if you include all the custom work involved it's a head hurting figure. I'll pm you so I don't take up your thred.

Looking good. Remove the other fog light so it matches and if your intersted in the xforce front & ypipe section for the H6, speak to Chris @ Best mufflers, his prices are pretty awesome.

Very neat wagon with some tidy mods planned.

Look forward to your progress.

t.renshaw34 wrote: Also in that two pak silver over black color so they look epic. Im fairly sure they only did 300 sets in the 2 pak and the rest where just STD silver.

All the "silver" CS9's are finished in the same hyper silver. Even the JDM ones are the same. JDM also had the option of gold however. There were only 300 CS9 WRX's released here in Oz.

But theres about 310 sets of silver wheels as Ive bought in a few.

Haha you and the rims mark :p. The US cs9 rims are finished in a STD silver. They are the factory wheel for the preface lift spec B's in the US.

very clean the lip fits in perfectly....

but it's missing a foggie

3rspecb wrote:Looking good. Remove the other fog light so it matches and if your intersted in the xforce front & ypipe section for the H6, speak to Chris @ Best mufflers, his prices are pretty awesome.

Is that Chris at Carlton in Sydney Also nice wagon

also a corazon grille would tie in nicely

JKeep2.5i wrote:also a corazon grille would tie in nicely

ahh i cant say im overly fussed about the corazon grilles, i got plans for a grille tho just waiting for payday so i can buy Cliffo's old grille off him