Page 1 of 54

T.Renshaw34 - Project Liberty - JDM SPEC B FRONT END!

PostPosted: Thu Aug 25, 2011 8:02 pm
by t.renshaw34
12039634_10153657439503669_4848548619227028924_n.jpg
6
12039634_10153657439503669_4848548619227028924_n.jpg (86.05 KiB) Viewed 8823 times
Updated 15/12/15

Hey guys,

Taylor here, 23 years old now. I purchased my Liberty GT in October 2010 when I was 18 after I finished high school. In my opinion the perfect daily and weekend warrior.

Thanks to the following people for all their help along the way with the Liberty. Your help is greatly appreciated and the lib would have never got to where it is without your help.

Michael (Garage88)
Leo (HKS-180)
Mick (DR20T)
Jackson (Jacks-gt-b)
Sean (S&J)
Shane (s&J)
Kieran (Chaotic)
Matt (KIDO Tuning)
Pep (Panel Beater)
Mark Smith (Crusin)
Owen (Rev Zone)
Michael (MV Auto)

anyone else I may have forgotten :)

Lighting:
6,000k 55w high beam
6,000k 55w low beam
6,000k 35w Fog Lights
6,000k 15 w Reversing
LED parker
LED licence plate
LED Map
LED Dome

Exterior:
JDM Spec B Bumper (Not Yet Installed - Jan 2016)
JDM Spec B fog lights (Not Yet Installed - Jan 2016)
Spec B Front Lip (Not Yet Installed - Jan 2016)
Postface Spec B Honeychomb grille (Not Yet Installed - Jan 2016)
Black out chrome ring on Grille (Not Yet Installed - Jan 2016)
Black out Chrome surround on preface headlights (Not Yet Installed - Jan 2016)
Flip FMIC Core and re fabricate piping (Not Yet Installed - Jan 2016)
Black XX plates
Subaru Genuine Boot lip
Ultrex Diffuser Plastic Welded and Resprayed Bar
Stanza hood Scoop
legacy Black Edition Rear badge
Rolled Fenders Front and Rear
Flared Front Fenders 5mm
Smoked Tail Lights 50%

Interior:
Innovate mtx - Wide band O2 digital air/fuel
Innovate mtx - Oil temp
Perrin dual gauge mount
STI Shifter
LED foot weels(RED)
LED doors (RED)
LED Boot lighting (RED)
Pioneer 6.5" over size woofers in the bottom front doors
Pioneer 6.5" over size 3 ways in the rear doors
custom spacers for front speakers
Dynamat extreme Sound Deading mega Pack. (Doors, under rear seats, under parcel shelf.)
STI Boot Mat
DAMD steering wheel
K2 Gear Floor Mats

Suspension:
BC BR Coilovers
Perrin 25mm front sway bar viewtopic.php?f=10&t=13404&p=290787#p290787
Perrin 25mm Rear sway bar
Kartboy Solid Front Sway bar links viewtopic.php?f=10&t=13404&p=290787#p290787
Kartboy Solid Rear Sway bar links
Whiteline Front Control arm - lower inner front bushing
Whiteline Front Control arm - lower inner rear bushing (ALK)
Whiteline Ball Joints
Whiteline Tie Rod Ends
Whiteline Rear Control arms
Whiteline Rear Bushing kit
Cusco Front Strut Brace viewtopic.php?f=10&t=13404&p=290787#p290787
Cusco Rear Strut Brace
Cusco Brake Stopper
Cusco Front H Brace Type 2
Cusco Rear under body 4 point chassis Brace
Cusco Crossmember Power Brace
Cusco Power Brace A
Cusco Power Brace B
Cusco Power Brace C
Cusco Power Brace D
Cusco Power Brace E


Wheels/Brakes:
ROTA Gravels 18x8.5
STI center caps
Pirelli P Zero 245/35/18
Brembo's 4/2 Ferarri Yellow
Goodridge 6 Piece S/S Braided Lines
project MU Pads (type NS for street. Hyper carbon for track)
DBA 4000 T3 slotted rotors Front and Rear
EBC fluid

Engine: 210KWATW (98 Octane)

HKS EVC 5
-high ~ 17.5psi
-low ~ 14psi
unopened EJ20X (208)
Garage88 custom catch can
Stanza CF Abs Cover
Stanza CF Battery Cover
AVO Radiator Cover
Carbign Craft CF Alternator Cover
HKS CF intake Snorkle
CF intake Box
ATF Cooler
Redline Tuning Hood Struts

Fuel System: viewtopic.php?f=10&t=13404&p=290787#p290787
Walbro 250 fuel pump
ID 1000cc injectors
ID Dual Billet Rails
ID braided Lines
Speed Flow Fittings
Tomie fuel regulator
S&J custom parallel conversion

Induction/Turbo:
Kstech 73mm CAI
Garage88 Silicone Inlet hose
HKS GT2530 (2860R-10 with a .60 AR front cover and EJ20 specific .63 rear housing)
HKS Turbo Heat Shield
Custom Flipped FMIC 2.25" hot side, 2.5" cold side
Turbosmart Kompack BOV Full Plumb Back

Exhaust:
Killer B B holy headers 4 into 1 (Ceramic Coated) viewtopic.php?f=10&t=13404&p=290787#p290787
Killer B up pipe
HKS dump pipe
Upgraded 100cell high flow cat
X force center and Y pipe
X Force Varex mufflers with custom 2.5" quad tips
Rallitek Polyurethane Exhaust Hangers

1.jpg
1.jpg (83.17 KiB) Viewed 9670 times
2.jpg
2.jpg (46.3 KiB) Viewed 9670 times
3.jpg
3.jpg (91.96 KiB) Viewed 9670 times
4.jpg
4.jpg (30.96 KiB) Viewed 9670 times
5.jpg
5.jpg (56.21 KiB) Viewed 9670 times
7.jpg
7.jpg (64.42 KiB) Viewed 9670 times
8.jpg
8.jpg (104.79 KiB) Viewed 9670 times
9.jpg
9.jpg (45.95 KiB) Viewed 9670 times
10.jpg
10.jpg (100.91 KiB) Viewed 9670 times

Re: Member Profile - T.Renshaw34

PostPosted: Thu Aug 25, 2011 8:04 pm
by t.renshaw34
Feel free to comment on what mods need doing next guys, :)

Re: Member Profile - T.Renshaw34

PostPosted: Thu Aug 25, 2011 8:33 pm
by cruisn
Is nice, needs STi lip. :D

Re: Member Profile - T.Renshaw34

PostPosted: Thu Aug 25, 2011 10:00 pm
by t.renshaw34
Haha it's got the genuine Subaru one... :p. Don't need a sticker on it too :p.

Re: Member Profile - T.Renshaw34

PostPosted: Thu Aug 25, 2011 10:38 pm
by Kekotic
Slimeline plates, number plate height change at the front (Cruisn is selling some brackets for it).
Also not a fan of the blue wheel lock nuts, too boy racer for me. But that's just a personal preference. I'm guessing when you pick up the gold CS9's you will be changing that?

Re: Member Profile - T.Renshaw34

PostPosted: Thu Aug 25, 2011 10:50 pm
by t.renshaw34
Haha good call. The blue lock nuts are gone now. Got them free off a mate,
Yea black slim lines was on my mind too, fair cheap and make a massive difference too :D.

Re: Member Profile - T.Renshaw34

PostPosted: Thu Aug 25, 2011 11:15 pm
by Stu
Wow the 10,000K lights are pretty blue! :D I'm a big fan of the blueish 8,000K HIDs which I've fitted to both our Libertys. The 6,000k should be really "toothpaste" white.

Any pics of your brakes? oh and did you notice much difference in braking power after fitting the DBA 4000 rotors? I've been thinking about fitting these for a little more bite.

Re: Member Profile - T.Renshaw34

PostPosted: Sat Aug 27, 2011 3:51 pm
by t.renshaw34
I'll throw some pics up tomorrow when I clean her :D, yea big big difference but I also put some much nicer brake pads in at the same time. :).

Re: Member Profile - T.Renshaw34

PostPosted: Wed Sep 07, 2011 6:56 pm
by t.renshaw34
DIY Billies with a fresh coat of paint, this was my first go as you can see there are a few chips where I dinged it/pulled the tape off to early :p. the other 3 look much better with no dings.

Re: Member Profile - T.Renshaw34

PostPosted: Wed Sep 07, 2011 7:17 pm
by JKeep2.5i
thought high beams where 55w and low beams 35w?

Re: Member Profile - T.Renshaw34

PostPosted: Wed Sep 07, 2011 7:22 pm
by hamish_023
Put the dyno tune up! Any pics with all the mods on?
:D

Re: Member Profile - T.Renshaw34

PostPosted: Wed Sep 07, 2011 8:41 pm
by Dropz
Billies :) Wew! See you Saturday for some work!

Re: Member Profile - T.Renshaw34

PostPosted: Thu Sep 08, 2011 11:57 am
by t.renshaw34
If you look in the book... the factory HID's you get in libs are 55w low beam also, and the standard bulbs in your lib on low beam are running at 55w. (gen 4)
I didnt see a point in only putting 35w HID's in when the factory HID's are 55w anyways.

Have been pulled over twice with them in there and not once have cops even asked to look under the hood.

Dont have a dyno to put up sorry Hamish, Sean asked if I wanted it printed out and I didnt really see a point as theres still more modding to be done :P, just showed me on the computer.

Re: Member Profile - T.Renshaw34

PostPosted: Thu Sep 08, 2011 12:24 pm
by hamish_023
Gen4 2004-2006 never came factory with HIDs.

Try to post it up when your done as 180atw on the stock small auto turbo with just a tmic, dump is quite ambitious

Re: Member Profile - T.Renshaw34

PostPosted: Thu Sep 08, 2011 12:41 pm
by cruisn
t.renshaw34 wrote:Haha it's got the genuine Subaru one... :p. Don't need a sticker on it too :p.


I see no STi lip in your pic........