Page 1 of 1

GEN3 Liberty :) new intake mod

PostPosted: Sun Jul 31, 2011 9:55 pm
by jason.harvey
not many of the older libertys around on here so im going to try do my thing haha :) im only young so as iv said, bring on the advice an tips :)

pretty much the first mod i have done is putting in a new intake with pod to clean up the engine bay and get that huge increase in power haha, comparrison pic attached :)

Re: GEN3 Liberty :) new intake mod

PostPosted: Mon Aug 01, 2011 10:35 am
by Jim
Thats a cool set-up.

However, see how you have those ghetto little filters on your ventilation system? Ditch those and hook it up to a catch can properly, or you will find your cabin and engine bay will contantly reek of spent oil and junk, not to mention the EPA will bend you over.

Otherwise, good job.

Oh, make the pipe black for sexy time.

Re: GEN3 Liberty :) new intake mod

PostPosted: Mon Aug 01, 2011 11:41 am
by cruisn
Or get a few pieces of small pipe welded onto the intake pipe, drill though the centre into the intake and connect those breather lines properly. Then paint it all satin black. :good:

Catch can on an N/A Jim? Please. :D

Re: GEN3 Liberty :) new intake mod

PostPosted: Mon Aug 01, 2011 12:20 pm
by Nottage969
Looks the goods mate, would look sexy-time in black I agree! How much did it set you back from start to finish? You make the pipe yourself orr?.. What's the intake sound like? Notice your 0.9999kw increase in power? :P

Re: GEN3 Liberty :) new intake mod

PostPosted: Mon Aug 01, 2011 3:02 pm
by jason.harvey
thanks jim an mark; that was my next decision to decide what to do with them breathers, ill have a look at that :)

michael; i actually was going to make it but someone offered me 100 for everything there so i took it aha, otherwise i was going to use it as a template as it fits perfect. as for intake sound, you can hear it under exceleration though i havnt taken it for a real good drive as my licence is currently suspended.

Re: GEN3 Liberty :) new intake mod

PostPosted: Mon Aug 01, 2011 8:33 pm
by Nottage969
jason.harvey wrote:michael; i actually was going to make it but someone offered me 100 for everything there so i took it aha, otherwise i was going to use it as a template as it fits perfect. as for intake sound, you can hear it under exceleration though i havnt taken it for a real good drive as my licence is currently suspended.


Oh wow you picked up quite a freaking awesome deal then! :shock:

Fair enough then, well let me know once you've taken it for a decent spin! Thanks for the feedback.

Re: GEN3 Liberty :) new intake mod

PostPosted: Mon Aug 01, 2011 8:48 pm
by jason.harvey
Nottage969 wrote:
jason.harvey wrote:michael; i actually was going to make it but someone offered me 100 for everything there so i took it aha, otherwise i was going to use it as a template as it fits perfect. as for intake sound, you can hear it under exceleration though i havnt taken it for a real good drive as my licence is currently suspended.


Oh wow you picked up quite a freaking awesome deal then! :shock:

Fair enough then, well let me know once you've taken it for a decent spin! Thanks for the feedback.


yer was cheering :) i will sneak out for a spin tomorrow ;)