Jaydece's Major Development Project

[bosc0]

Hot.... fry your tyres all day!

[jaydece]

Taken from the gopro thread....

Okay here is a small demo of my gopro....excuse the noob vid..

Go Pro Placed:
Rear Bumper Middle

Device:
Hero 3 HD White Edition

Driver:
Gino aka Brother G aka 3rspecb in all scenes

1 Clip with 3 Scenes:
1 - in my car
2 and 3 in the bearing noise charged 3.0

Recorded:
720p @ 60FPS using iphone gopro wireless app to control

What Ive been looking at on the gopro forums and concerned is the crackling, static and low sound quality from the gopro....

I've invested in a external mic output and boom mic...will see if it makes a difference...

[3rspecb]

Thanks for letting me stretch the legs in your car, thoroughly enjoyed it brother. Spewing about the traffic when we went out in my car. We need to find some better roads and do it again

[jacks-GTB]

love it FLAMES

[satogixxer]

What Ive been looking at on the gopro forums and concerned is the crackling, static and low sound quality from the gopro....

I've invested in a external mic output and boom mic...will see if it makes a difference...

Nice vids. I have the older GoPro HD Hero, but maybe this is relevant... I found when mounting it on my motorbike I would get clicky noises and a fair amount of wind noise. After sticking cotton buds inside the housing with the camera I found the clicky noises all but eliminated and overall sound quality much better - try it out it might help?

[Kekotic]

Nice vids. I have the older GoPro HD Hero, but maybe this is relevant... I found when mounting it on my motorbike I would get clicky noises and a fair amount of wind noise. After sticking cotton buds inside the housing with the camera I found the clicky noises all but eliminated and overall sound quality much better - try it out it might help?

Also with the GoPro you get a little rubber insert which some people don't realise how to use. That can stop the gopro from moving around on the slider, and reduces some noise.

[jaydece]

Nice vids. I have the older GoPro HD Hero, but maybe this is relevant... I found when mounting it on my motorbike I would get clicky noises and a fair amount of wind noise. After sticking cotton buds inside the housing with the camera I found the clicky noises all but eliminated and overall sound quality much better - try it out it might help?

Also with the GoPro you get a little rubber insert which some people don't realise how to use. That can stop the gopro from moving around on the slider, and reduces some noise.

Awesome Kieran! Thanks! Do this also work with the suction mount?

[jaydece]

What Ive been looking at on the gopro forums and concerned is the crackling, static and low sound quality from the gopro....

I've invested in a external mic output and boom mic...will see if it makes a difference...

Nice vids. I have the older GoPro HD Hero, but maybe this is relevant... I found when mounting it on my motorbike I would get clicky noises and a fair amount of wind noise. After sticking cotton buds inside the housing with the camera I found the clicky noises all but eliminated and overall sound quality much better - try it out it might help?

Thanks Mick! noted! good to know and all good!

[Corsair]

Pulls hard and the car(s) sound(s) tough!
Look forward to the next one.

[Boostaddict]

FLAMES........

[bosc0]

Lysterfield, Wellington and Napoleon Roads.... why not head up the mountain lads? Don't you want to be my friend? :p

Nice capture, would be nice to have been able to see some of the car. Next time GoPro drive party.... 1 GoPro per car.

[Murfb4]

you need to let me have a drive justin

[jslayz]

Kudos for nice vid!
Sounds great!

J

[jaydece]

UPDATE:

1/ Wideband LC-2 has arrived and been installed ( had some install hiccups but tis now working 100% ) LC-2 is much much much more better than the LC-1 having that its self calibrated and so much more easier to use...I have installed the LC-2 into the GT boostgauge and it works really well! very accurate and didn't have any issues with it hooking up.

2/ New fuel pump ( fuel pump number 5!! )
DW 300 installed....It was a lengthy process to get this pump to fit in the oem bucket due to the connector and length. Ended up heavily modifying and trimming inside of the bucket...
In conjunction with this I purchased the CJ motorsport walbro pump holder
Thanks to jacks GTB for some assistance and feedback on the kit. Highly recommended if upgrading to a pump with no OEM fitment..

** Will be selling my DW65c pump soon **

3/ Air intake, ABS and Batt covers are on finally after years collecting dust...all had to be modded to fit around my engine bay....next on the list is to tidy up all the loom and wiring I newly created to run for the LC-2 and 4 port solenoid...

4/ Retune.....hoping to have this planned soon and finalize my petrol tune and E85 tune

[dr20t]

Awesome update Justin

Anxiously awaiting results