club.liberty.asn.au

Posted: **Sat Oct 14, 2006 2:57 pm**

Well I finally picked up my new Hyperflow TMIC hooray!! MUCH larger core (385mm x 155mm x 115mm core size) Giddy UP!!

It's still in bubble wrap and will be putting this on in about 1-2 mths once everything settles down with little Veronika.

Now my question is should I be changing anything else while the TMIC is off before replacing with the new one? Should I use the same hoses etc? Any gaskets or other plumming i need to worry about?

Finally no i did not get this from James...I don't like being phucked over more than once!

Posted: **Sun Oct 15, 2006 12:07 pm**

Sh*t man 1-2 months then you intall cos you dont have time...........i'll come over this avo and put it in :lol:

Posted: **Sun Oct 15, 2006 9:02 pm**

And while your at it, install my boost gauge too.

Posted: **Mon Oct 16, 2006 2:41 pm**

Kosti wrote:
Now my question is should I be changing anything else while the TMIC is off before replacing with the new one? Should I use the same hoses etc? Any gaskets or other plumming i need to worry about?

It "should" be a straight swap - you shouldn't need anything else. But having said that, you won't know untill you remove the std cooler to see if anyhting needs to be replaced...

Aftermarket hoses would be better and would advice them if you can get them for the B4 (b4 right?)

Posted: **Mon Oct 16, 2006 9:08 pm**

Yep for my B4..

The original TMIC and hoses look like this..

So not sure what sort of silicon hoses I would find that would match.

Posted: **Mon Oct 16, 2006 11:20 pm**

i've found you a set of silicon hoses to fit the B4 intercooler

3 companys make them all around the 16000 yen mark+ shiping which would'nt be to much cos the weight

Posted: **Tue Oct 17, 2006 9:51 am**

PICTURES MAN!!

Posted: **Wed Oct 18, 2006 5:54 pm**

sweet kosti, u finally got yours. put in on now.
I will post pics of mine and a walkthrough on how to install it soon.

Posted: **Wed Oct 18, 2006 6:19 pm**

icandy wrote:sweet kosti, u finally got yours. put in on now.
I will post pics of mine and a walkthrough on how to install it soon.

Kewl, can't wait to see them.

Hopefully Phat will come up with some plumming to suit!

Posted: **Thu Oct 19, 2006 8:50 am**

Keep us B4ers updated Kosti, interested to see how this turns out for you.

Posted: **Thu Oct 19, 2006 7:05 pm**

Twinturbotas wrote:Keep us B4ers updated Kosti, interested to see how this turns out for you.

Will do mate! will do

Posted: **Fri Oct 27, 2006 2:29 pm**

Hey Con your 3 samco hoses have arrived

Posted: **Fri Oct 27, 2006 7:57 pm**

PHAT GT wrote:Hey Con your 3 samco hoses have arrived

Well drop them off!

(If only there were red) :evil:

club.liberty.asn.au

My New TMIC

My New TMIC

Re: My New TMIC