Page 1 of 2
hks ssqv installed! pew pew!
Posted:
Wed Jul 25, 2007 9:47 pmby viriix
Big thanks again to the phat man!
Fitted in the HKS SSQV and HKS panel filter.
Sounds nice, and quiet enough to be enjoyed as well.
Thanks Michael :]
Posted:
Thu Jul 26, 2007 4:41 amby SkoobyGT
LOL, the SSQ BOV's are great, and with the apexi CAI you get nice intake flutter too
Posted:
Thu Jul 26, 2007 9:05 amby XRC15T
Flutter is bad for turbo....
Posted:
Thu Jul 26, 2007 9:37 amby hks180
welcome to the club mate !! haha pheww phewww club haha
yeh flutter is bad ,, im been getting that in low rpm .... =(
Leo
Posted:
Thu Jul 26, 2007 10:28 amby SkoobyGT
It's only the flutter through the CAI, that you can't hear when the airbox is on.
It's only on like half throttle when you back off softly you will get it.
No worse than having a standard box on there and not hearing anything, but it still happens you just dont hear it.
Nothing like the SR20 flutter.
Posted:
Thu Jul 26, 2007 10:59 amby MY07GT
SkoobyGT wrote:Nothing like the SR20 flutter.
Oooo i miss that flutter! You know wat im talking about Leo!
Phil.
Posted:
Thu Jul 26, 2007 11:09 amby hks180
MY07GT wrote:SkoobyGT wrote:Nothing like the SR20 flutter.
Oooo i miss that flutter! You know wat im talking about Leo!
Phil.
HAHAHA sure do mate sure do ........ ball bearing turbo .... mmmmmmm
when i got the car from japan ... soon as it landed i was looking for the bov .. look every where ... then come to the conclusion the guy didn't even have a bov .. typical jap drifter .. hahahaha
hmmm ... i want my 180 back !! hahahaha
Leo
Posted:
Thu Jul 26, 2007 11:27 amby viriix
My mate has a big flutter on his s15 and his loud zorst lol
hahahaha oh well..
Posted:
Thu Jul 26, 2007 12:27 pmby fish_boy79
if you want flutter ... just put on a fmic. i got too much flutter, pain in the ass really.
Posted:
Thu Jul 26, 2007 2:02 pmby bonski
are these easy to fit?
Do you have to cut the engine cover?
Is idle affected?
PM sent to mike.
Posted:
Thu Jul 26, 2007 2:28 pmby hks180
bonski wrote:are these easy to fit?
Do you have to cut the engine cover?
Is idle affected?
PM sent to mike.
no need to cut anything with HKS ssqv ... and very easy to install ..
i didn't have any issue with idle .....
Leo
Posted:
Thu Jul 26, 2007 3:04 pmby MY07GT
Hmmzzz..... i kinda miss the kssssshhhhh sound.
But from wat i remember it was quite loud on my 180.
Any other quieter bov's around?
Phil.
Posted:
Thu Jul 26, 2007 4:01 pmby fish_boy79
MY07GT wrote:Hmmzzz..... i kinda miss the kssssshhhhh sound.
But from wat i remember it was quite loud on my 180.
Any other quieter bov's around?
Phil.
greddy is pretty quiet
Posted:
Fri Jul 27, 2007 10:30 amby viriix
bonski wrote:are these easy to fit?
Do you have to cut the engine cover?
Is idle affected?
PM sent to mike.
Didn't have to cut the cover for the new MY07 which was great, my idle only seems to be a bit funny when i start the car now, and sits around 1500rpm initially i've noticed, but once you put her in gear, to reverse or go, and stop etc it drops back down to the normal 700rpm idle..
I'll keep watching it though..
Posted:
Fri Jul 27, 2007 10:49 amby XRC15T
Is that cold or warm start? it should normal if cold start.