Page 1 of 2
Greddy BOV Type RZ
Posted:
Sun Sep 26, 2010 7:56 pmby hks180
Was over at phat gt place yesterday ... and one of the forum member decided to get this new RZ BOV ..
These can be plumb back or run full atmo ... everything still fits under the cover ..no trim require !! install took less then 10mins .... ooh i love the black finish on these BOV
!!
Anyway if your after a BOV ... should consider these ... and you know who to contact !
here are some photos ..
Leo
Re: Greddy BOV Type RZ
Posted:
Mon Sep 27, 2010 7:30 amby blacktop™
I feel so privileged that I got to touch it! It was pretty tempting to just say yeah chuck it on lol
But back on topic this is a really nice blow off valve! The black colour is limited edition btw
Re: Greddy BOV Type RZ
Posted:
Mon Sep 27, 2010 8:45 amby tangcla
Does it make any fancy noise if running in plumback?
Re: Greddy BOV Type RZ
Posted:
Mon Sep 27, 2010 9:09 pmby senator
Re: Greddy BOV Type RZ
Posted:
Mon Sep 27, 2010 9:17 pmby teK--
That is one sexy bov. Shame it gets hidden under the engine cover!
Re: Greddy BOV Type RZ
Posted:
Mon Sep 27, 2010 9:50 pmby Kekotic
teK-- wrote:That is one sexy bov. Shame it gets hidden under the engine cover!
That all depends on who is looking at your engine bay.....
Re: Greddy BOV Type RZ
Posted:
Tue Sep 28, 2010 12:00 pmby Jimmy S
Nice... any indication of cost?
Re: Greddy BOV Type RZ
Posted:
Tue Sep 28, 2010 12:23 pmby blacktop™
Bit over $400
Re: Greddy BOV Type RZ
Posted:
Tue Sep 28, 2010 4:50 pmby Jimmy S
Is that including the adapter?... Not too bad, but hard to justify for something which is essentially just for noise...
Re: Greddy BOV Type RZ
Posted:
Tue Sep 28, 2010 7:56 pmby blacktop™
Yeah that includes plumb back adaptor. Some stock/old blow off valves can't handle high boost pressures but yeah ur pretty much right!
Re: Greddy BOV Type RZ
Posted:
Tue Sep 28, 2010 10:36 pmby moggy
Jimmy S wrote:Is that including the adapter?... Not too bad, but hard to justify for something which is essentially just for noise...
When it's plumbed back it doesn't make any noise.......The Greddy is adjustable to eliminate compressor surge and prevent premature boost leakage while increasing boost response between shifts. The Subaru unit doesn't make any noise either, it's just not adjustable.
Bob.
Re: Greddy BOV Type RZ
Posted:
Wed Sep 29, 2010 2:08 pmby Jimmy S
I mean the adapter to suit the Liberty...? The silver peice in between the BOV and the intercooler...
Also, if you think that a plumb-back BOV doesn't make any noise, you aren't listening hard enough...
Re: Greddy BOV Type RZ
Posted:
Wed Sep 29, 2010 2:18 pmby moggy
It's a straight bolt on fit to the Lib, as I don't drive with my head under the bonnet I can assure you there is no change in sound levels between the standard unit and the Greddy. When it's unplumbed it's a different matter.
Bob.
Re: Greddy BOV Type RZ
Posted:
Wed Sep 29, 2010 3:18 pmby Arith
Jimmy S wrote:Also, if you think that a plumb-back BOV doesn't make any noise, you aren't listening hard enough.
Full plumb-back on a stock system will register some noise, but it'll barely be noticeable. However replace the factory panel filter with a pod intake and you'll get 'BOV' type noise from the intake (not the BOV).
Re: Greddy BOV Type RZ
Posted:
Wed Sep 29, 2010 3:23 pmby hks180
Jimmy S wrote:I mean the adapter to suit the Liberty...? The silver peice in between the BOV and the intercooler...
If you buy the liberty(legacy) kit then yes (As pictured)
Leo
