My new liberty with mods :)

[<GB>]

Just got home after picking up the car and going for a bit of a drive.

Car is making 361.8Nm torque at 3195RPM and 178.2KW at 5511RPM

Gains are 34.9Nm and 26.2kW

George said the boost has not been touched from factory settings as they didn't have to.

Boost is from factory and was 14.2psi.

Will scan and post the graph in my post the mods thread when I'm next in the office tomorrow.

That's good! Are u happy with that?

Link me to your thread

[<GB>]

GOT AN EMAIL TODAY AND THE EXHAUST BITS ARE IN SO THEY WILL GET INSTALLED MONDAY MORNING, IM HOPING I GET IT TUESDAY

[t.renshaw34]

Wooo. . Did you get a new Y pipe? As your center was already 3"?
What brand/size Y pipe did you get?

[<GB>]

Im getting magnaflow mufflers and not sure what the y pipe is but its 3 inch, im letting them handle it but its costing me around $1400 supply fit

[t.renshaw34]

Ehhhhk D:, hope it comes out as worth it .

[Gambit]

Im getting magnaflow mufflers and not sure what the y pipe is but its 3 inch, im letting them handle it but its costing me around $1400 supply fit

exy...... !

[<GB>]

I know it's exy but it's stainless... I asked a mate at an exhaust shop and he said the mufflers would be worth a packet, I just couldn't be fucked going and getting the car taking it elsewhere and then taking it back all to save a couple of 100 like it's a fair drive from my work and even further from home, I just want the thing done by Xmas so I can go away

[<GB>]

change of plans, im going 2.5 in twins from the 3 in Y so its going to be a little cheaper and not so nosy which is what i told them i didnt want as im keeping the sleeper look with this one

[t.renshaw34]

2.5" on the Y is a good idea , is what most people on here get .

[bass_straitener]

Don't worry too much Brandon! I've had 2 mechanic mates drive my car on the weekend since the mods and tune and they were really impressed by the work done at Revzone. Both these guys had driven my car prior to the work so could appreciate the difference. Both were really impressed. I've already lined up the next bit of work as advised by George and am now waiting for the Christmas spending to end so I can continue with the car. I'm getting the 3 inch mid section to 2.5 inch Y pipe done early next year. That will complete my engine type mods and get the 180awkw I was after. I reckon you'll be very happy with the work at Revzone. The pricing is very good as well as I've researched it and actually came out to more than your quote based on all bits being stainless.

[<GB>]

Don't worry too much Brandon! I've had 2 mechanic mates drive my car on the weekend since the mods and tune and they were really impressed by the work done at Revzone. Both these guys had driven my car prior to the work so could appreciate the difference. Both were really impressed. I've already lined up the next bit of work as advised by George and am now waiting for the Christmas spending to end so I can continue with the car. I'm getting the 3 inch mid section to 2.5 inch Y pipe done early next year. That will complete my engine type mods and get the 180awkw I was after. I reckon you'll be very happy with the work at Revzone. The pricing is very good as well as I've researched it and actually came out to more than your quote based on all bits being stainless.

Yeah I hope all goes well lol I've only driven the car for a few weekends only lol
How much were the quotes u got?

2.5" on the Y is a good idea , is what most people on here get .

Cool if I had 3 inch I wouldn't really care, twin 2.5 flow enough

[bass_straitener]

How much were the quotes u got?

I was only looking at the AVO version of the mid section and Y pipe and a set of AVO mufflers. Comes close to $2000 installed. Full stainless and quality gear.

[<GB>]

cool stuff, stainless is always exy

[PHAT GT]

How much were the quotes u got?

I was only looking at the AVO version of the mid section and Y pipe and a set of AVO mufflers. Comes close to $2000 installed. Full stainless and quality gear.

i can get you a HKS or Fujitsubo S/S catback for less than that

[Jaz]

How much were the quotes u got?

I was only looking at the AVO version of the mid section and Y pipe and a set of AVO mufflers. Comes close to $2000 installed. Full stainless and quality gear.

A TCP turbo back is less than that fully installed as well. Also full stainless. I'll vouch for the quality.

Don't think for a second that paying for an AVO branded one will make you better power.