club.liberty.asn.au

Posted: **Sat Oct 05, 2013 10:44 pm**

Cripes!

Posted: **Sun Oct 06, 2013 1:35 am**

Mmmmm data!

Posted: **Mon Oct 28, 2013 5:41 pm**

MINI UPDATE:

So as a little trial I decided to buy this new kit from TS...It's part of there new HP series.

One of the issues with the normal WG spring setup is:

1/ limited to 26 psi pre load spring rates...and you need to install like 3 springs to get it to 26 psi...pain in the ( )( )..inner, middle and outer springs...
2/ over time the springs become weak and don't hold boost...
3/ installation is a bitch....if your trying to install the springs on the car....which your not supposed to...I cheated when I installed my 18 psi pre load springs....

The HP range has a pre load spring of 25psi ( the big farker and its stiff as! :lol:

) and 10 psi - with the total combination of 35 psi pre load......There's a 40psi one as well...

Not that I will be running this amount of boost.... :shock:

..Stagea M35 anyone with 30+ psi....? ....for me I'm sticking to the 25psi one only

Thanks to Scotty's customs for the recommendation....Will get this installed soon and once I get my retune done...will have my findings and post results...

http://www.turbosmart.com.au/news/new-release-turbosmart-hp-wastegates

Posted: **Mon Oct 28, 2013 5:45 pm**

Any rough ETA on that retune Justin?

Posted: **Mon Oct 28, 2013 6:09 pm**

Kekotic wrote:Any rough ETA on that retune Justin?

Ummmm....no idea K....bit busy with work...Im hoping early Nov....but don't think it will happen...

Posted: **Tue Oct 29, 2013 11:15 am**

you going to leave it at 25psi ?

Posted: **Tue Oct 29, 2013 2:37 pm**

<GB> wrote:you going to leave it at 25psi ?

Of course not!...Ill try 30 psi :lol:

Posted: **Tue Oct 29, 2013 3:42 pm**

jaydece wrote:
<GB> wrote:you going to leave it at 25psi ?

Of course not!...Ill try 30 psi

I might ha ha if I put anew turbo on lol

Posted: **Fri Nov 08, 2013 6:11 pm**

news?

Posted: **Sat Nov 09, 2013 2:58 pm**

Murfb4 wrote:news?

Needs to pick up his new spark plugs and varex muffler.

Posted: **Mon Mar 10, 2014 9:59 am**

So have the handling mods been sorted yet???

Posted: **Mon Mar 10, 2014 12:43 pm**

senator wrote:So have the handling mods been sorted yet???

LOL! Ahh tony...admire your persistence to the question

TBH...priority on the car has died lately.....but still open to handling mods maybe someday...so your question isn't completely dead in the water :lol:

Cheers Tony :wink:

Posted: **Mon Mar 10, 2014 1:26 pm**

Did this get tuned by Cihan in the end or is that not an option anymore?

Posted: **Mon Mar 10, 2014 4:00 pm**

Kekotic wrote:Did this get tuned by Cihan in the end or is that not an option anymore?

Haven't installed new waste-gate spring and I'm back using a dw65c after snapping the dw300 while changing fuel bucket filter...so I'm fuel pump limited anyway....so no retune atm...

Posted: **Fri Oct 23, 2015 9:18 pm**

club.liberty.asn.au

Jaydece's Major Development Project

Re: Jaydece's Major Development Project

Re: Jaydece's Major Development Project

Re: Jaydece's Major Development Project

Re: Jaydece's Major Development Project

Re: Jaydece's Major Development Project

Re: Jaydece's Major Development Project

Re: Jaydece's Major Development Project

Re: Jaydece's Major Development Project

Re: Jaydece's Major Development Project

Re: Jaydece's Major Development Project

Re: Jaydece's Major Development Project

Re: Jaydece's Major Development Project

Re: Jaydece's Major Development Project

Re: Jaydece's Major Development Project

Re: Jaydece's Major Development Project