T.Renshaw34 - Project Liberty - JDM SPEC B FRONT END!

[t.renshaw34]

Oh they are 114.3 not 100. Explains that one.

DAMD lips where about $800-1,200. Got them in carbon fibre. Slightly nicer than "plastic trim".

Cusco bracing wasn't much more than that again. Made a huge difference under hard direction changing.

I'm considering a set of the STI 17x7.5 08 tbsti style wheels for track use. But can't decide on track wheels yet. Maybe some of those takuma wheels. Have a set of dunlop direzza 03g R comp's in the shed but would rather put a set of decent radials on my daily wheels.

[Boostaddict]

Mate it's looking the goods.

Love those skirts bad!!!!

[Kody.B]

DAMD lips where about $800.

$800 for front and rear? That's not bad at all for DAMD. Are they different to Ed's, because I'm sure he said somewhere that his were more than that?

Car looks great! I still like the Gravels

[t.renshaw34]

.

[t.renshaw34]

Yea could have been closer to $1,000 but wasn't as much as say the DAMD front fenders.
I got some healthy discount as I have spent some decent $$$ with the phat man.


Cheers guys

[shav]

looking dam tough Taylor. I like

[Kekotic]

Any updates on the car Taylor?

[t.renshaw34]

Yeppp . I'm getting some pics together atm to post up later on this evening when I get home.

[kiahatsiu]

You still got those 850cc injectors? I am sure they will be more than enough for you e85..

[KiDo_Tuning]

E85 time this saturday? Want me to email you a tune for the injectors?

[t.renshaw34]

sooooo

update time .

lets start with the good...

stock throttle body hose went bang a little while ago. It wouldnt even make 1psi, Was interesting to drive a 2.0L non turbo.

Replaced with a nice little tomioka racing one. Fit is PERFECT. deffiantly worth the extra coin over the ebay ones.

IMG_2401.JPG (213.88 KiB) Viewed 3596 times

Stock blow off valve was also leaking boost and had started becoming a restriction. (you are the weakest link... GOOD BYE!)

Turbosmart full plumb back went in...

IMG_2888.jpg (9.02 KiB) Viewed 3596 times

Tinted the side indicators for a bit more BLAAAACK

IMG_2544.JPG (226.99 KiB) Viewed 3596 times

Fuel system to run E85 is here but not on yet...

IMG_2768.JPG (172.09 KiB) Viewed 3596 times

Finished putting the Cusco power bracing on. Car feels very flat and solid under hard direction changes.

IMG_2781.JPG (124.26 KiB) Viewed 3596 times

IMG_2782.JPG (117.01 KiB) Viewed 3596 times

IMG_2655.JPG (101.77 KiB) Viewed 3596 times

.
...
... ...
... ... ...
... ... ... ...
... ... ... ... ...
... ... ... ... .... ... ...
... ... ... ... ... ... ... ...
... ... ... ... ... ... ... ... ...
... ... ... ... ... ... ... ... ... ... ........Time for the not so good news........
... ... ... ... ... ... ... ... ...
... ... ... ... ... ... ... ...
... ... ... ... ... ... ...
... ... ... ... ... ...
... ... ... ... ...
... ... ... ...
... ... ...
... ...
...
.



Lets call it a "slight ding" with a tyre wall at a recent K&T AUTOMOTIVE Track Day...

IMG_2790.JPG (192.61 KiB) Viewed 3596 times

IMG_2791.JPG (200.72 KiB) Viewed 3596 times

Good news is its only panel damage and Mick is helping me out big time with the panels from a lib he stripped for parts.

on the road to recovery...

IMG_2807.JPG (122.22 KiB) Viewed 3596 times

[t.renshaw34]

IMG_2808.JPG (108.29 KiB) Viewed 3596 times

IMG_2809.JPG (128.94 KiB) Viewed 3596 times

IMG_2852.JPG (217.12 KiB) Viewed 3596 times

[Bezzza]

Everybody's worst nightmare at a track day
Sounds like it should be a fairly straight forward/cheap fix luckily.

On a brighter note the mods are looking great! Didn't know you could put so many extra braces under the car

[Dropz]

Good to see the repairs are in action already! Much sooner than the 2 months you said on the day.

[shav]

geez thats some damage right there. Really keen on how much extra those Cusco braces add to the handling of the car.