club.liberty.asn.au

Posted: **Tue Jan 15, 2013 11:28 am**

dawesy wrote:Can't help with the budiet but can offer my experience .had j speed bushes fitted at g88 was just over 300 buks then next day fitted whiteline sways and eibach springs and had a wheel alignment done and the difference is like day and night even with the front sway still is more rear happy but feels super confident in the front where it never did before.
Rides a bit firmer but not harsh ( I drive Sydney's shitest rd daily )
Deffs worth doing the mods when you have the cash

Thanks for the feedback. That helps. It's something I want done for sure. The understeer is a nightmare when you are used to cars that turns when you want it to. I reckon I'll PM Taylor again and see what he can do to help get the $ down.

Posted: **Thu Jan 31, 2013 2:32 pm**

Can anybody tell me quickly if a WRX STi tmic will fit onto my car without too much issue?

Posted: **Thu Jan 31, 2013 10:40 pm**

What year?

Posted: **Fri Feb 01, 2013 9:27 am**

zch91 wrote:What year?

same year or near to. Im not sure. Thinking MY07-09 maybe.

Posted: **Fri Feb 01, 2013 9:32 am**

shav wrote:
zch91 wrote:What year?

same year or near to. Im not sure. Thinking MY07-09 maybe.

unless you change in the intake mani to an sti intake....then it will not fit....

Posted: **Fri Feb 01, 2013 9:57 am**

ah, ok thanks Jack. Sounds like Im better off getting either an AVO, PW or Perrin version instead. Leaning towards the PW one due to the better shroud they have. Extra price yes, but seems to be a better kit. Thoughts? Im not looking for huge numbers either. Just want good bang for buck as Im willing to stick with the stock turbo. The Perrins are under 1k, not sure on the price of the AVO's.

Posted: **Fri Feb 01, 2013 10:28 am**

shav wrote:Hey guys, not had my car very long so the list of mods are very few and far between. It's also my lease car too so I'll be keeping the appearance and mods to the car minimal.

I knew this statement wouldn't hold true - the power bug has bitten :mrgreen:

Posted: **Fri Feb 01, 2013 10:57 am**

Hotwire wrote:
shav wrote:Hey guys, not had my car very long so the list of mods are very few and far between. It's also my lease car too so I'll be keeping the appearance and mods to the car minimal.

I knew this statement wouldn't hold true - the power bug has bitten

haha. yeah didnt take long either. Only had the car since July last year. :roll:

Posted: **Fri Feb 01, 2013 11:58 am**

The PW TMIC is under $1000 I believe, was thinking about getting one

Posted: **Fri Feb 01, 2013 12:20 pm**

Perrin FTW from what i've heard.. I've got one too and is doing me nicely =)

Posted: **Fri Feb 01, 2013 12:29 pm**

shav wrote:ah, ok thanks Jack. Sounds like Im better off getting either an AVO, PW or Perrin version instead. Leaning towards the PW one due to the better shroud they have. Extra price yes, but seems to be a better kit. Thoughts? Im not looking for huge numbers either. Just want good bang for buck as Im willing to stick with the stock turbo. The Perrins are under 1k, not sure on the price of the AVO's.

what power are you looking at?

because I would save that money & make a diy water sprayer with a pressure switch

AVO, Perrin, and PW all have bar & plate....that design causes turbulence around the fins, a rolled edge works so much efficiently....like the stock ones...

Posted: **Fri Feb 01, 2013 1:49 pm**

jacks-GTB wrote:
shav wrote:ah, ok thanks Jack. Sounds like Im better off getting either an AVO, PW or Perrin version instead. Leaning towards the PW one due to the better shroud they have. Extra price yes, but seems to be a better kit. Thoughts? Im not looking for huge numbers either. Just want good bang for buck as Im willing to stick with the stock turbo. The Perrins are under 1k, not sure on the price of the AVO's.

what power are you looking at?

because I would save that money & make a diy water sprayer with a pressure switch

AVO, Perrin, and PW all have bar & plate....that design causes turbulence around the fins, a rolled edge works so much efficiently....like the stock ones...

interesting to hear thanks Jack. Have considered a diy sprayer but wasnt sure on the effectiveness. Any links on the kit?

Posted: **Fri Feb 01, 2013 1:50 pm**

ferret89 wrote:The PW TMIC is under $1000 I believe, was thinking about getting one

on their website its advertised for 1100. Where did you see it advertised for 1k?

Posted: **Fri Feb 01, 2013 1:51 pm**

Aidos wrote:Perrin FTW from what i've heard.. I've got one too and is doing me nicely =)

yeah you have the biggest one that fits under the bonnet from what I have read Aidan. win win situation.

Posted: **Fri Feb 01, 2013 2:00 pm**

anybody used these?
http://www.prospeedracing.com.au/produc ... y-BL5.html
http://www.prospeedracing.com.au/produc ... 52d09.html
http://www.prospeedracing.com.au/produc ... odels.html

club.liberty.asn.au

Member Profile - Shav 07 Liberty GT Premium

Re: Member Profile - Shav

Re: Member Profile - Shav

Re: Member Profile - Shav

Re: Member Profile - Shav

Re: Member Profile - Shav

Re: Member Profile - Shav

Re: Member Profile - Shav

Re: Member Profile - Shav

Re: Member Profile - Shav

Re: Member Profile - Shav

Re: Member Profile - Shav

Re: Member Profile - Shav

Re: Member Profile - Shav

Re: Member Profile - Shav

Re: Member Profile - Shav

club.liberty.asn.au

Member Profile - Shav *07 Liberty GT Premium*

Re: Member Profile - Shav

Re: Member Profile - Shav

Re: Member Profile - Shav

Re: Member Profile - Shav

Re: Member Profile - Shav

Re: Member Profile - Shav

Re: Member Profile - Shav

Re: Member Profile - Shav

Re: Member Profile - Shav

Re: Member Profile - Shav

Re: Member Profile - Shav

Re: Member Profile - Shav

Re: Member Profile - Shav

Re: Member Profile - Shav

Re: Member Profile - Shav

Member Profile - Shav 07 Liberty GT Premium