Australian Liberty Owners Club
Gambit's Project
Re: Gambit's Development Project
by garbo41610 » Tue Jul 05, 2011 10:42 am
Even the Gen4 under carriage is more interesting to look at the my GenV goddammit!!!
Car(s): Steel Silver MY10 GT Wagon + 1985 Subaru Sherpa
Mods: (GT) HKS Panel Filter. The HKS I put in the MY10 is the same filter I took out of my MY05 GT. So yes, they do fit. Custom leather heel pad to minimise carpet wear in the drivers footwell. Slotted front rotors. (Sherpa) 14'' 6 Spoke mags, Chrome Gear Shift (sick!), Alloy Pedals (sicker!), new positive and negative battery terminals, Alpine cda-9827 H/U, JBL GT 6x9's boxed and mounted (sickest!), Kicker DS650.2 component speakers mounted in the footwells in flibreglass pods, Alpine MRP-F200 4 channel amp (4x40wRMS), Rebadged with hektik chrome eBay badges, STi stickers for more powaaaa, "leather" handbrake boot, recarpetted with grey/black car carpet from Bunnings, sick Clarke Rubber boot mat, polished and waxed.
Mods: (GT) HKS Panel Filter. The HKS I put in the MY10 is the same filter I took out of my MY05 GT. So yes, they do fit. Custom leather heel pad to minimise carpet wear in the drivers footwell. Slotted front rotors. (Sherpa) 14'' 6 Spoke mags, Chrome Gear Shift (sick!), Alloy Pedals (sicker!), new positive and negative battery terminals, Alpine cda-9827 H/U, JBL GT 6x9's boxed and mounted (sickest!), Kicker DS650.2 component speakers mounted in the footwells in flibreglass pods, Alpine MRP-F200 4 channel amp (4x40wRMS), Rebadged with hektik chrome eBay badges, STi stickers for more powaaaa, "leather" handbrake boot, recarpetted with grey/black car carpet from Bunnings, sick Clarke Rubber boot mat, polished and waxed.
-
garbo41610 - -stickered-
- Posts: 1786
- Joined: Thu Jun 11, 2009 11:28 am
- Location: Emu Heights and Randwick depending on time of day
- Car: MY10 GT Wagon Steel Silver
- Real name: Phil
Re: Gambit's Development Project
by Gambit » Tue Jul 05, 2011 12:06 pm
hahaha nice one Garbo, but you have the beasty Sherpa, cant contend with that ! 
-
Gambit - Posts: 1856
- Joined: Wed May 19, 2010 7:20 pm
- Location: Melbourne
- Car: Subaru
Re: Gambit's Development Project
by garbo41610 » Tue Jul 05, 2011 12:51 pm
True dat!!!
I got asked by someone today: "Phil, when are you going to slap a rotary in the Sherpa?"
"Hmmm, an interesting idea." I though to myself.
Then it hit me like a bolt of lightning... I'm talking about the mrs hand across the back of my head when I suggested it.
I got asked by someone today: "Phil, when are you going to slap a rotary in the Sherpa?"
"Hmmm, an interesting idea." I though to myself.
Then it hit me like a bolt of lightning... I'm talking about the mrs hand across the back of my head when I suggested it.
Car(s): Steel Silver MY10 GT Wagon + 1985 Subaru Sherpa
Mods: (GT) HKS Panel Filter. The HKS I put in the MY10 is the same filter I took out of my MY05 GT. So yes, they do fit. Custom leather heel pad to minimise carpet wear in the drivers footwell. Slotted front rotors. (Sherpa) 14'' 6 Spoke mags, Chrome Gear Shift (sick!), Alloy Pedals (sicker!), new positive and negative battery terminals, Alpine cda-9827 H/U, JBL GT 6x9's boxed and mounted (sickest!), Kicker DS650.2 component speakers mounted in the footwells in flibreglass pods, Alpine MRP-F200 4 channel amp (4x40wRMS), Rebadged with hektik chrome eBay badges, STi stickers for more powaaaa, "leather" handbrake boot, recarpetted with grey/black car carpet from Bunnings, sick Clarke Rubber boot mat, polished and waxed.
Mods: (GT) HKS Panel Filter. The HKS I put in the MY10 is the same filter I took out of my MY05 GT. So yes, they do fit. Custom leather heel pad to minimise carpet wear in the drivers footwell. Slotted front rotors. (Sherpa) 14'' 6 Spoke mags, Chrome Gear Shift (sick!), Alloy Pedals (sicker!), new positive and negative battery terminals, Alpine cda-9827 H/U, JBL GT 6x9's boxed and mounted (sickest!), Kicker DS650.2 component speakers mounted in the footwells in flibreglass pods, Alpine MRP-F200 4 channel amp (4x40wRMS), Rebadged with hektik chrome eBay badges, STi stickers for more powaaaa, "leather" handbrake boot, recarpetted with grey/black car carpet from Bunnings, sick Clarke Rubber boot mat, polished and waxed.
-
garbo41610 - -stickered-
- Posts: 1786
- Joined: Thu Jun 11, 2009 11:28 am
- Location: Emu Heights and Randwick depending on time of day
- Car: MY10 GT Wagon Steel Silver
- Real name: Phil
Re: Gambit's Development Project
by smythie » Tue Jul 05, 2011 5:55 pm
Until you notice the turbo in a better location for future upgrades...garbo41610 wrote:Even the Gen4 under carriage is more interesting to look at the my GenV goddammit!!!
Flag Bitch
MY06 3.0RB
MY06 3.0RB
-
smythie - Posts: 5227
- Joined: Mon Oct 27, 2008 12:46 pm
- Location: Sydney (w-end)
- Car: MY06 3RB - Blue
Re: Gambit's Development Project
by cruisn » Tue Jul 05, 2011 7:58 pm
Nice work. Wider rubber on oem rims or new rims also?
-
cruisn - Posts: 6560
- Joined: Tue Nov 03, 2009 8:09 pm
- Location: Melbourne
- Car: MY02 GTB E Tune
- Real name: Mark
Re: Gambit's Development Project
by Gambit » Tue Jul 05, 2011 8:19 pm
cruisn wrote:Nice work. Wider rubber on oem rims or new rims also?
Thanks, New Wedsport TC105N 18x8.5 +42 that don't clear brembos ;(
Hoping 235/40/18 will fit ok, especially when lowered on some decent coilovers, which i am sure it definitely would now.
-
Gambit - Posts: 1856
- Joined: Wed May 19, 2010 7:20 pm
- Location: Melbourne
- Car: Subaru
Re: Gambit's Development Project
by cruisn » Tue Jul 05, 2011 8:24 pm
An 8.5 +42 that doesnt clear Brembos? Go on!
Nice rims, pity though as I have some nice refinished gloss black Brembos.
Nice rims, pity though as I have some nice refinished gloss black Brembos.
-
cruisn - Posts: 6560
- Joined: Tue Nov 03, 2009 8:09 pm
- Location: Melbourne
- Car: MY02 GTB E Tune
- Real name: Mark
Re: Gambit's Development Project
by Gambit » Tue Jul 05, 2011 8:58 pm
refinished brembos.. ?! haha lucky you, ya bastard ! 
Although i am eyeing off a set of some wicked arse Bling style Calipers that will fit the OEM's too not to mention fill the 18's! mua hahaha *evil laugh*
Although i am eyeing off a set of some wicked arse Bling style Calipers that will fit the OEM's too not to mention fill the 18's! mua hahaha *evil laugh*
-
Gambit - Posts: 1856
- Joined: Wed May 19, 2010 7:20 pm
- Location: Melbourne
- Car: Subaru
Re: Gambit's Development Project
by hamish_023 » Tue Jul 05, 2011 9:04 pm
Gambit wrote:refinished brembos.. ?! haha lucky you, ya bastard !
Although i am eyeing off a set of some wicked arse Bling style Calipers that will fit the OEM's too not to mention fill the 18's! mua hahaha *evil laugh*
car to share? Fit OEM rotors? I know that the wilwood ones are they?
-
hamish_023 - Posts: 3608
- Joined: Mon Aug 10, 2009 8:21 pm
- Location: Adelaide
- Car: Black Liberty GT
- Profile URL: viewtopic.php?f=10&t=10013
Re: Gambit's Development Project
by smythie » Tue Jul 05, 2011 10:06 pm
Yeah, they must have really thick spokescruisn wrote:An 8.5 +42 that doesnt clear Brembos? Go on!
Flag Bitch
MY06 3.0RB
MY06 3.0RB
-
smythie - Posts: 5227
- Joined: Mon Oct 27, 2008 12:46 pm
- Location: Sydney (w-end)
- Car: MY06 3RB - Blue
Re: Gambit's Development Project
by cruisn » Tue Jul 05, 2011 10:07 pm
Cool. 
Heres my gloss black Brembos mid refinishing as of today......... Should look good with white Brembo decals.
Ive already finished the complete set for my car.
Heres my gloss black Brembos mid refinishing as of today......... Should look good with white Brembo decals.
Ive already finished the complete set for my car.
-
cruisn - Posts: 6560
- Joined: Tue Nov 03, 2009 8:09 pm
- Location: Melbourne
- Car: MY02 GTB E Tune
- Real name: Mark
Re: Gambit's Development Project
by Kekotic » Tue Jul 05, 2011 10:21 pm
cruisn wrote:Ive already finished the complete set for my car.
Are you running the black ones, or one of the 3 other sets you have?
If only I could fit them under my rims
-
Kekotic - -stickered-
- Posts: 6452
- Joined: Tue Jun 08, 2010 6:46 pm
- Car: MY07 Liberty GT Spec.B
- Profile URL: viewtopic.php?f=10&t=13066
Re: Gambit's Development Project
by Gambit » Tue Jul 05, 2011 10:25 pm
Damn.. that does look nice and glossy! White brembo decals should look the goods, when its all done, what rotors and pads did you go for?
-
Gambit - Posts: 1856
- Joined: Wed May 19, 2010 7:20 pm
- Location: Melbourne
- Car: Subaru
Re: Gambit's Development Project
by cruisn » Tue Jul 05, 2011 10:32 pm
Options for pads and rotors can be given to the the buyer. Cheapest will be new standard pads and skimmed good oem s/h rotors. Can do all DBA rotors and performance pads.
Sorry for the semi off topic mate.
Sorry for the semi off topic mate.
-
cruisn - Posts: 6560
- Joined: Tue Nov 03, 2009 8:09 pm
- Location: Melbourne
- Car: MY02 GTB E Tune
- Real name: Mark
Re: Gambit's Development Project
by Gambit » Tue Jul 05, 2011 10:36 pm
All good mate.
Well at least your spoilt for choice when it comes to brembos.
Well at least your spoilt for choice when it comes to brembos.
-
Gambit - Posts: 1856
- Joined: Wed May 19, 2010 7:20 pm
- Location: Melbourne
- Car: Subaru
Who is online
Users browsing this forum: No registered users and 3 guests