Member Profile - PUDZ RSC3.0RB

[alessandro132]

Love the progress Grant, can't wait until the E85 is all sorted and she's on the dyno!

[PUDZ RSC3.0RB]

Love the progress Grant, can't wait until the E85 is all sorted and she's on the dyno!

Thanx Al and ur not the lone ranger.

Hope ur flat-stick arrives 2moro. Its always nice to have a new one in the bag.

[Brunsy3.0]

An awesome read gets my mind ticking. The urge increases at every page

A great build Grant. Is great to see the tuners, Matt and Edward, manufacturer, Tim, and some of the heavy hitters like Mick all chiming in to get the best possible information on the matter. Also those like jslayz and bbbenny ways having good insight This benefits not only Grant but the whole community especially us H6 owners who ALL have been tempted by the supercharger idea. Thanks to all that have inputted towards not only this thread but any information that will benefit others

If i have missed some of the main people involved i apologise as i have been reading this thread over a week so my bad

Top effort guys and girls too much to contemplate now so thanks

[PUDZ RSC3.0RB]

An awesome read gets my mind ticking. The urge increases at every page

A great build Grant. Is great to see the tuners, Matt and Edward, manufacturer, Tim, and some of the heavy hitters like Mick all chiming in to get the best possible information on the matter. Also those like jslayz and bbbenny ways having good insight This benefits not only Grant but the whole community especially us H6 owners who ALL have been tempted by the supercharger idea. Thanks to all that have inputted towards not only this thread but any information that will benefit others

If i have missed some of the main people involved i apologise as i have been reading this thread over a week so my bad

Top effort guys and girls too much to contemplate now so thanks

+1 ^^^. Thanx Brunsy, very well spoken, I echo ur comments completely. Again thanx to all.

[west_minist]

Thank you. In the end, we all drive subaru's. I wanna sell my GC8, but its so nice, how can I?
I want a Tribeca, but too expensive here. Its like buying a small house....Literally!!!

Its sad tuning cars you will never feel or drive with setups you have never feel. I have never drove a SC car. lol. hahaha Drove many Turbo cars, so you have to improvised in your feelings how such a car feels.

So in all, every bit of into to just do it right to perfection helps. There can't be always war amount us

I hope to see your power go up, vids of power slides !!!!! lol and great remarks.

On another note, I hear waiting for a Russian to come out his cold to finis his SC. I hate tunes that lays around.

[PUDZ RSC3.0RB]

Been a week or so just a quick update.

Sti lip from the US arrived this morning - yet to unpack. Ull be happy with my car now now Al

ID 1000's are being installed over the weekend and Matt will be retuning for these on 98.

Waiting on 58mm S/Cer pulley from Tim, 2 1/4" xforce mid and y-pipe upgrade from Best Mufflers.

E85 change-over and tune/dyno could happen towards the end of next week, hopefully before Matt heads away.

[kiahatsiu]

This thing is going to make some good power now.

[Tradewind]

New pulley stock arriving Wednesday with me, can zip it out to you after they arrive here

[Tradewind]

Pudz

Did you replace the clutch since last dyno session?

[alessandro132]

[PUDZ RSC3.0RB]

This thing is going to make some good power now.

Ian, yes lets hope ur right, but im pretty confident things will go well and we can get it safely well into the 200's.

Its definitely got plenty of grunt now and sometimes I think I should be happy with it as is. But the dossier has always been to have it tuned to its optimum and
to get the best out of it without compromising the factory reliability of the engine, the cooling system and the drivetrain.

With the help of everyone involved so far I think we still have some room to improve power n torque and keeping driveability and reliability.

Once E85 and its supporting mods are complete and Matts ability gets it tuned very well, I can safely say that may well be the finish of the power mods.

Of course there will always be the up keep, first of which will be a Jim Berry race clutch and then new rubber.

Also will be doing Micks fuel pump wiring upgrade that he spoke of earlier.

[PUDZ RSC3.0RB]

Pudz

Did you replace the clutch since last dyno session?

No Tim I haven't as yet but a Jim Berry is in the pipeline.

The clutch has been fine since the Libs first big dyno day a few months back. It did cause some issues towards the end of a very hot day last time with everything
getting some punishment from the dyno stresses.

Talking to Matt, this next dyno run on E85 shouldn't be very long so hopefully the clutch holds up and we can get some safe accurate results reasonably quickly.

I guess the worst that can happen is the clutch gives issues and it brings forward Jim's clutch install. Then one more short dyno run with it installed just
for a safe tune and accurate numbers.

Fingers n toes crossed it all goes to plan.

Just thought, my next big mission will be to learn to log.

[PUDZ RSC3.0RB]

I have made a little progress in the last day or so. My Sti replica PU style lip finally showed up, wacked it on last arvo. Sti emblem in carbon silver is on the way.

The quality of the lip is ok - good I spose for the price I paid. This one http://www.ebay.com/itm/FOR-05-07-SUBARU-LEGACY-GT-FRONT-BUMPER-LIP-SPOILER-BODYKIT-JDM-BUMPER-ONLY-PU-/301009600762?pt=Motors_Car_Truck_Parts_Accessories&hash=item46159200fa.

Also got my ID1000's installed 2day and surprise surprise they are leak free. . Matt's flashing a tune in 2moro.

Some pics :

Photo0545.jpg (188.19 KiB) Viewed 4746 times

Photo0555.jpg (172.92 KiB) Viewed 4746 times

Photo0546.jpg (211.82 KiB) Viewed 4746 times

All back together

Photo0553.jpg (229.92 KiB) Viewed 4746 times

[PUDZ RSC3.0RB]

The 2nd last mod for next weeks E85 upgrade arrived on Wednesday.

Xforce 2.5" mid pipe and 2" y-pipe

Photo0561.jpg (159.4 KiB) Viewed 4714 times

The last mod should arrive 2moro. 58mm Supercharger pulley from Tim at Raptors Inc, which should give us 9.5 - 10psi boost to work with.

Xforce xhorst mod installed. Completing full exhaust modification

100_1279.JPG (244.01 KiB) Viewed 4714 times

100_1280.JPG (245.66 KiB) Viewed 4714 times

100_1278.JPG (246.9 KiB) Viewed 4714 times

Hopefully ill get some decent exhaust vids up after next weeks E85 changeover and dynotune with Matt.

[west_minist]

Looking nice. Can wait to see the final figure