Australian Liberty Owners Club

Skip to content

Kiahatsiu's 05 Wagon: stepping it up again.

Show off what mods you've done to your car.
Post a reply

Re: Kiahatsiu's 05 Wagon-- now with emotive short film.

Postby kiahatsiu » Sat Oct 06, 2012 10:40 am

Been driving this around on the base tune. It goes a lot better now. Alot. Saving the planet is good fun. This, however, does not mean I will stop eating whale.
Kinda flush. Fitment is something. ADM as F*ck.
User avatar
kiahatsiu
 
Posts: 1799
Joined: Tue Sep 01, 2009 6:09 pm
Location: Brisbane
Car: Silver 05 GT Wagon
Real name: Ian
Top

Re: Kiahatsiu's 05 Wagon-- now with emotive short film.

Postby dr20t » Sat Oct 06, 2012 10:53 am

:lol:

Good to see you're enjoying saugram based fuel

Power delivery is so much better on it hey?
Addicted to corn juice....

My FrankenStien build thread here: viewtopic.php?t=14137
User avatar
dr20t
 
Posts: 4191
Joined: Sun Oct 23, 2011 10:43 pm
Location: South West Sydney NSW
Car: 04 Liberty GT Auto
Real name: Mick
Profile URL: viewtopic.php?t=14137
Top

Re: Kiahatsiu's 05 Wagon-- now with emotive short film.

Postby kiahatsiu » Sun Oct 07, 2012 8:40 am

dr20t wrote::lol:

Good to see you're enjoying saugram based fuel

Power delivery is so much better on it hey?


Yeah, so much better. It feels much more responsive and torquey. If I could drive it would run deep into the 12s as it sits now.
Kinda flush. Fitment is something. ADM as F*ck.
User avatar
kiahatsiu
 
Posts: 1799
Joined: Tue Sep 01, 2009 6:09 pm
Location: Brisbane
Car: Silver 05 GT Wagon
Real name: Ian
Top

Re: Kiahatsiu's 05 Wagon-- now with emotive short film.

Postby kiahatsiu » Wed Oct 17, 2012 11:16 am

With a bit of luck there should be an update on this contraption some time today.
Kinda flush. Fitment is something. ADM as F*ck.
User avatar
kiahatsiu
 
Posts: 1799
Joined: Tue Sep 01, 2009 6:09 pm
Location: Brisbane
Car: Silver 05 GT Wagon
Real name: Ian
Top

Re: Kiahatsiu's 05 Wagon-- now with emotive short film.

Postby Rome_BRZ » Wed Oct 17, 2012 12:01 pm

kiahatsiu wrote:With a bit of luck there should be an update on this contraption some time today.


:mrgreen:
Rome_BRZ
formerly Rome_STI
 
Posts: 4305
Joined: Wed Apr 13, 2011 8:06 pm
Location: Sydney, NSW
Car: 2015 Audi S3 Sedan
Real name: Jerome
Profile URL: viewtopic.php?f=10&t=12392
Top

Re: Kiahatsiu's 05 Wagon-- down the slippery slope.

Postby kiahatsiu » Fri Nov 16, 2012 4:10 pm

So, as some of you might have gathered I have bought an ej257 bottom end. It has Manley platinum pistons, Manley H beam rods (not eagles, yay), ACL bearings, Nitrided crank, fettled oil galleries, 12mm oil pump and 14mm studs. Plans is to stick my DAVCS heads on it with a bit of port work. Also bought some JUN 264 cams from Garage 88.
I am considering through a killerB sump, baffle and oil pick up on it too.
Hope to have it back on the road soon enough.
Kinda flush. Fitment is something. ADM as F*ck.
User avatar
kiahatsiu
 
Posts: 1799
Joined: Tue Sep 01, 2009 6:09 pm
Location: Brisbane
Car: Silver 05 GT Wagon
Real name: Ian
Top

Re: Kiahatsiu's 05 Wagon-- down the slippery slope.

Postby dr20t » Fri Nov 16, 2012 5:51 pm

Can't friggen wait for this

Sounds very similar to my build but you're about six months ahead of me
Addicted to corn juice....

My FrankenStien build thread here: viewtopic.php?t=14137
User avatar
dr20t
 
Posts: 4191
Joined: Sun Oct 23, 2011 10:43 pm
Location: South West Sydney NSW
Car: 04 Liberty GT Auto
Real name: Mick
Profile URL: viewtopic.php?t=14137
Top

Re: Kiahatsiu's 05 Wagon-- down the slippery slope.

Postby jslayz » Fri Nov 16, 2012 8:39 pm

kiahatsiu wrote:So, as some of you might have gathered I have bought an ej257 bottom end. It has Manley platinum pistons, Manley H beam rods (not eagles, yay), ACL bearings, Nitrided crank, fettled oil galleries, 12mm oil pump and 14mm studs. Plans is to stick my DAVCS heads on it with a bit of port work. Also bought some JUN 264 cams from Garage 88.
I am considering through a killerB sump, baffle and oil pick up on it too.
Hope to have it back on the road soon enough.


Sweet hardware.

Hmmmm cams :-)
You will be going before me, keen to hear what your thoughts are about them.

J
CURRENT - ATP GTX 3576 - 22psi - 283.7awkw
OLD - Dom 1.5Xtr - Last dyno 254ahkw, previous 238ahkw, first 224awkw.
My journey thread: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523
My Lib Pics here: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523&start=570#p370656
User avatar
jslayz
 
Posts: 2810
Joined: Tue Mar 09, 2010 11:32 pm
Location: Perthhhhhh
Car: 2005 Liberty GT Wagon
Real name: J
Top

Re: Kiahatsiu's 05 Wagon-- down the slippery slope.

Postby kiahatsiu » Tue Nov 20, 2012 8:30 pm

So yeah, um, rubber arm and all that. GTX3076 twist mount.
Kinda flush. Fitment is something. ADM as F*ck.
User avatar
kiahatsiu
 
Posts: 1799
Joined: Tue Sep 01, 2009 6:09 pm
Location: Brisbane
Car: Silver 05 GT Wagon
Real name: Ian
Top

Re: Kiahatsiu's 05 Wagon-- down the slippery slope.

Postby Boostaddict » Tue Nov 20, 2012 8:36 pm

kiahatsiu wrote:So yeah, um, rubber arm and all that. GTX3076 twist mount.



Ooooohhh yummy!!! Looking for 300awkw's ????
Not a Subaru...... Something MUCH better

NOPE..... That's shit too. Bus anyone??
User avatar
Boostaddict
 
Posts: 2985
Joined: Sun May 13, 2012 10:52 am
Location: Sydney
Car: 07 LGT Tuned By Sti
Real name: Daniel
Profile URL: viewtopic.php?f=10&t=22537
Top

Re: Kiahatsiu's 05 Wagon-- down the slippery slope.

Postby kiahatsiu » Tue Nov 20, 2012 8:43 pm

Doubt it will make that, but it would be nice if it did. It will be on 98 initially, as my current fuel system will struggle on e85, that said, it would be good for 305 on e85. Could get there on 98 I guess.
Kinda flush. Fitment is something. ADM as F*ck.
User avatar
kiahatsiu
 
Posts: 1799
Joined: Tue Sep 01, 2009 6:09 pm
Location: Brisbane
Car: Silver 05 GT Wagon
Real name: Ian
Top

Re: Kiahatsiu's 05 Wagon-- down the slippery slope.

Postby dr20t » Tue Nov 20, 2012 8:50 pm

Right intake and setup with that turbo, cams and bottom end setup will get to 300 easy Ian

Good luck mate as said watching eagerly!

Mick
Addicted to corn juice....

My FrankenStien build thread here: viewtopic.php?t=14137
User avatar
dr20t
 
Posts: 4191
Joined: Sun Oct 23, 2011 10:43 pm
Location: South West Sydney NSW
Car: 04 Liberty GT Auto
Real name: Mick
Profile URL: viewtopic.php?t=14137
Top

Re: Kiahatsiu's 05 Wagon-- down the slippery slope.

Postby senator » Wed Nov 21, 2012 7:27 am

+1 for eating whale.....so wrong yet so tasty :mrgreen: :mrgreen: :mrgreen:

Ian.... looking forward to your end result.

Is that mummy wagon nude tuner working his magic on your beast again?
Not a soobi anymore, but still slightly dirty
"TEAM TONY"
User avatar
senator
 
Posts: 3217
Joined: Sun Apr 15, 2007 8:53 pm
Location: SYDNEY
Top

Re: Kiahatsiu's 05 Wagon-- down the slippery slope.

Postby Rome_BRZ » Wed Nov 21, 2012 10:06 am

Sounds insane Ian...is this going to be ready for you to come down to our track day :twisted:
Rome_BRZ
formerly Rome_STI
 
Posts: 4305
Joined: Wed Apr 13, 2011 8:06 pm
Location: Sydney, NSW
Car: 2015 Audi S3 Sedan
Real name: Jerome
Profile URL: viewtopic.php?f=10&t=12392
Top

Re: Kiahatsiu's 05 Wagon-- down the slippery slope.

Postby kiahatsiu » Sun Dec 02, 2012 1:21 pm

Right.
Back in Australia. Picked my cams up from my mates place. Just waiting on the bottom end to turn up at the shop now.
Anyone have any advice on valve springs and retainers?
Kinda flush. Fitment is something. ADM as F*ck.
User avatar
kiahatsiu
 
Posts: 1799
Joined: Tue Sep 01, 2009 6:09 pm
Location: Brisbane
Car: Silver 05 GT Wagon
Real name: Ian
Top
PreviousNext
Post a reply

Return to Post your mods

Who is online

Users browsing this forum: No registered users and 48 guests

Powered by phpBB® Forum Software © phpBB Group