Member Profile - alessandro132

[SH30RB]

I think we're all taking Team Funeral Hearse a little too seriously

Anyways, I need recommendations for good guard rollers/flarers. Nick recommended me one but I can't recall where he's located or how much dough he needs (to bake bread, obviously).

Eyyyy, Nicko! how mucha flaring do I need forrrrrrr the front-aa? Ideally don't want to be running stupid amount of camber

What are the specs of your wheels? The camber you run on the bc's will be enough to tuck the wheels in at the front. Mine tuck, just

[alessandro132]

They're 18x8.5 +46 the only thing I don't want is too much camber wear at the front, so if I can get away with ~ 2 degrees of negative camber and maybe 1mm of positive toe, I might be right!

[SH30RB]

They're 18x8.5 +46 the only thing I don't want is too much camber wear at the front, so if I can get away with ~ 2 degrees of negative camber and maybe 1mm of positive toe, I might be right!

Ahh okay, yeah they should tuck fine. Its not too much camber that the bc's run. I've maxed mine out and i've hardly noticed much camber wear in my tyres at all, but in saying that my tyres are shit and are a medium to hard compound

[cruisn]

Im running 8.5 +45 with 235's.

-1.5 on the fronts, zero scrubbing.

[alessandro132]

Thanks Mark, confirmed what Tony told me separately

[alessandro132]

Small update!

I've committed myself to Ed's BC BRs (too bad for anyone who wanted them ) and have also booked in with Phill B to get my guards rolled/pumped - happy days!

Looking to lower about 30mm from stock Spec B height, and will be running -1.5 deg of camber at the front.

Also taking advantage of Brian's detailing offer, will be stoked to get all those hideous swirl marks out of the car

[blacktop™]

Good stuff.
I've known Phill for years and years. he's a great guy. He's doing my car on the 30th

[alessandro132]

Good stuff.
I've known Phill for years and years. he's a great guy. He's doing my car on the 30th

Awesome stuff! Yeah Ed recommended him so I thought well I've got nothing to lose why not

What tasty wheels are you fitting to your GT-B now?

[SH30RB]

Where does Phil B work? Im thinking of getting my guards rolled

[bates91]

Where does Phil B work? Im thinking of getting my guards rolled

he comes to you, completely mobile. just need a flat driveway / car area

[alessandro132]

Where does Phil B work? Im thinking of getting my guards rolled

he comes to you, completely mobile. just need a flat driveway / car area

This. I'm using Ed's driveway in fact

[Jack_Keaka]

Where does Phil B work? Im thinking of getting my guards rolled

he comes to you, completely mobile. just need a flat driveway / car area

This. I'm using Ed's driveway in fact

Ed's driveway? i thought that was just a thin road that lead to his house...

[alessandro132]

Ed's driveway? i thought that was just a thin road that lead to his house...

Some say...

[Jack_Keaka]

Ed's driveway? i thought that was just a thin road that lead to his house...

Some say...

Bhahaha yes! thats happening

[blacktop™]

Same rims as yours Alex...except mine are better! Cos mine are +38 I had them on the 3.0r-b but need the guards rolled to put them back on the gt-b (didn't roll the guards previously)

Where and how much did you get replacement stickers from if you don't mind me asking

EDIT: yours are sticker less? In that case never mind about that question!