club.liberty.asn.au

Sweet. Love the hub caps.

That turbo makes some whistling noises.

Does your plates say BOOB?

Also that is poor, no skids!

Ill answer for Cracka; yes. His plates say qboob. A wise investment

Still don't see no mullet...

I had a mullet when i bought it. Then cold chisel CD was skipping in it so I cried and shaved it off. True story.

Sounds lame in person.

No skids, because it couldn't pull the skin off custard.

My nopics' Mini is tougher.




* The above comments may not be based on fact.

430hp atw. 15psi.

Over 400hp atw available for over 3000rpm.
Over 300hp atw for a touch over 4500rpm.

Thats with an unlocked auto at 1:1 gear. Not willing to risk the block without a set of head studs, rod bolts and cams.

Now thinking of a 4 link. fml.

https://www.youtube.com/watch?feature=p ... 2ul26r3dx4

Fuck it sounds mean

Something something power curve. Skids ahoy.

Baller, shot caller

Cannot really call that a power curve.

I'm informed the stock 14x6 and 215 bob janes ballooned on are incapable of keeping in check in overdrive at 80kmh with a squeeze of the pedal. So ugh... Time for truetrac and find some wheels.

17x10 and 17x7 steelies will be a good thing if I can find, paint them red and slap on some silver hubcaps. Baller.

So this sort of looks like this now...



With HID projector PAR56 lights in front. Getting a bit fancy on the wiring now, some trick shit going on I'll leak later...

Thinking of ditching the 17x9's for 17x11's with 315's if it keeps misbehaving. There's plenty of room and who doesnt want 2 odd foot of rubber under the bum...

Also...This showed up.



Anyone guess what's going on next...