Still mate she looks good
Australian Liberty Owners Club
Member profile - Cruisn.
Re: Mods list..... Cruisn.
by Fangin_RX » Fri Dec 04, 2009 9:07 pm
Whats this wagon we speak of? I see a Sedan with an extended rear boot. Should be called a Sedanextendedbootthingo imo.
Still mate she looks good
Still mate she looks good
MY00 Subaru Liberty (Legacy) RX 2.5L / 2009 Honda CRF250R
P PLATER
-------------------------------------------------------
P PLATER
-------------------------------------------------------
-
Fangin_RX - -stickered-
- Posts: 1892
- Joined: Sun Nov 16, 2008 11:26 am
- Location: Sydney, NSW
- Car: MY00 Liberty RX 2.5L - Gen 3
- Real name: Ethan
Re: Mods list..... Cruisn.
by cruisn » Sat Dec 05, 2009 10:14 am
Cheers Guys. 
The grille is very easy to make actually, and have done this a few times before. I probably should of done a DIY for this one.
Basically you just cut the inside bars out of the grille leaving you with the outer section. Paint is up to you. Then mesh it, wrapping the mesh around the rear edges and silicon/sikaflex in place.
I do like to mod my own things where possible. Heres a few ive done before......
Made the heat shield and airbox and brackets for the pod install on my SP20
Earlier Gen2 mesh grille and color coded badge
Mesh grille and painted when i first bought my Legacy GT.
Fit my GReddy ebc into the ash tray.
Made my own Master cylinder stopper and powdercoated it myself.
Fit my boost gauge into the factory drivers vent.
I like to tinker.
The grille is very easy to make actually, and have done this a few times before. I probably should of done a DIY for this one.
Basically you just cut the inside bars out of the grille leaving you with the outer section. Paint is up to you. Then mesh it, wrapping the mesh around the rear edges and silicon/sikaflex in place.
I do like to mod my own things where possible. Heres a few ive done before......
Made the heat shield and airbox and brackets for the pod install on my SP20
Earlier Gen2 mesh grille and color coded badge
Mesh grille and painted when i first bought my Legacy GT.
Fit my GReddy ebc into the ash tray.
Made my own Master cylinder stopper and powdercoated it myself.
Fit my boost gauge into the factory drivers vent.
I like to tinker.
-
cruisn - Posts: 6560
- Joined: Tue Nov 03, 2009 8:09 pm
- Location: Melbourne
- Car: MY02 GTB E Tune
- Real name: Mark
Re: Mods list..... Cruisn.
by Adrian2627 » Sat Dec 05, 2009 11:08 am
All great work Mark. Not everyone has the ability/resources to do work like this so it's great to see when it's done.
- Adrian2627
- Posts: 1056
- Joined: Mon Jan 07, 2008 6:11 pm
- Location: Gold Coast
- Car: BP5F (MY09) Legacy 2.0 GT Spec B
- Real name: Adrian
Re: Mods list..... Cruisn.
by cruisn » Sat Dec 05, 2009 2:13 pm
Cheers Adrian.
I used to have access to all id need to make things. I dont now, but with a bit of resourcefulness, Ive found i can still do most things.
I used to have access to all id need to make things. I dont now, but with a bit of resourcefulness, Ive found i can still do most things.
-
cruisn - Posts: 6560
- Joined: Tue Nov 03, 2009 8:09 pm
- Location: Melbourne
- Car: MY02 GTB E Tune
- Real name: Mark
Re: Mods list..... Cruisn.
by talev788 » Sun Dec 06, 2009 8:16 am
ohhh yeah im diggin that white badge, i mite change mine from black to white now lol
-
talev788 - Posts: 265
- Joined: Wed Aug 26, 2009 9:50 am
- Location: Newcastle
- Car: MY02 RX Sedan
- Real name: Chris
-
cruisn - Posts: 6560
- Joined: Tue Nov 03, 2009 8:09 pm
- Location: Melbourne
- Car: MY02 GTB E Tune
- Real name: Mark
Re: Mods list..... Cruisn.
by talev788 » Sun Dec 06, 2009 10:55 am
cruisn wrote:Cheers mate. Easy to do.
yeah done it before, but i think i mite buy a new badge and do it cos my current one has scratches in the silver stars from the previous owner
-
talev788 - Posts: 265
- Joined: Wed Aug 26, 2009 9:50 am
- Location: Newcastle
- Car: MY02 RX Sedan
- Real name: Chris
Re: Mods list..... Cruisn.
by cruisn » Tue Dec 15, 2009 7:38 pm
Bit of a spending spree on Import Monster.
Hanabi led taillights...
STi lip...
HKS Legamax mufflers...
Hanabi led taillights...
STi lip...
HKS Legamax mufflers...
-
cruisn - Posts: 6560
- Joined: Tue Nov 03, 2009 8:09 pm
- Location: Melbourne
- Car: MY02 GTB E Tune
- Real name: Mark
Re: Mods list..... Cruisn.
by wassell2381 » Wed Dec 16, 2009 4:45 pm
Lookin good mate! Should look spics when ya get those mufflers on and the rear LEDs. 
Current:
... TBC
Sold:
MY09 Liberty 3.0R Spec B
MY10 BMW 320d LCI
MY09 Impreza RS Hatch
MY04 Liberty Safety Pack Sedan
... TBC
Sold:
MY09 Liberty 3.0R Spec B
MY10 BMW 320d LCI
MY09 Impreza RS Hatch
MY04 Liberty Safety Pack Sedan
-
wassell2381 - -stickered-
- Posts: 374
- Joined: Mon Apr 13, 2009 2:06 pm
- Location: Perth, WA
- Car: Nil
- Real name: Dan
Re: Mods list..... Cruisn.
by cruisn » Wed Dec 16, 2009 4:49 pm
Cheers mate. Yeh should come together nicely.
-
cruisn - Posts: 6560
- Joined: Tue Nov 03, 2009 8:09 pm
- Location: Melbourne
- Car: MY02 GTB E Tune
- Real name: Mark
Re: Mods list..... Cruisn.
by julzzychan » Sat Dec 19, 2009 10:41 am
cruisn wrote:Cheers mate. Yeh should come together nicely.
would love to see the end results mark! good one mate!
Cheers,
Julz
Current - -> MY07 Liberty TBSTI Sedan Black #139/300 - Charcoal Rims, Phat Dump/ Mid pipe, K&N Filter
AWD - SOLD -> MY07 Liberty Obsidian Black[/b] BL5 EJ255 6SP Manual - STI'ed
| 6000K HID | LED I/O | STi Front/Rear Lip Spoilers | STI Braided Brake Lines | Silver 18" x 7.5 Enkei | Phat Dump Pipe | Centre - S/S Flex with 3" Resonator joint with 2.5" S/S Y split to M/S Hurricane Quad Mufflers | Blackened Grill | CF Stanza Eye Lid | Factory Sat-Nav | Resonator Delete | 50% Smoked Taillight | K2 Roof Finisher | Zero Side Strake Pair | DAMD Rear Extension pair | Cobb SF Intake Black | Grimspeed 3-port BCS | AVO Turbo Inlet + 265lph Fuel Pump | KidoTuned 189kW ATW |
1WR - SOLD -> MY06 Honda Black/Grey CBR600RR | Jardine RT-One Slip-On Pipe | ASV Lever | Diable Rosso II | Braided Brake Lines | Quick Shifter | PCIII
Julz
Current - -> MY07 Liberty TBSTI Sedan Black #139/300 - Charcoal Rims, Phat Dump/ Mid pipe, K&N Filter
AWD - SOLD -> MY07 Liberty Obsidian Black[/b] BL5 EJ255 6SP Manual - STI'ed
| 6000K HID | LED I/O | STi Front/Rear Lip Spoilers | STI Braided Brake Lines | Silver 18" x 7.5 Enkei | Phat Dump Pipe | Centre - S/S Flex with 3" Resonator joint with 2.5" S/S Y split to M/S Hurricane Quad Mufflers | Blackened Grill | CF Stanza Eye Lid | Factory Sat-Nav | Resonator Delete | 50% Smoked Taillight | K2 Roof Finisher | Zero Side Strake Pair | DAMD Rear Extension pair | Cobb SF Intake Black | Grimspeed 3-port BCS | AVO Turbo Inlet + 265lph Fuel Pump | KidoTuned 189kW ATW |
1WR - SOLD -> MY06 Honda Black/Grey CBR600RR | Jardine RT-One Slip-On Pipe | ASV Lever | Diable Rosso II | Braided Brake Lines | Quick Shifter | PCIII
-
julzzychan - -stickered-
- Posts: 728
- Joined: Mon Aug 06, 2007 3:28 pm
- Location: Clayton, Melbourne
- Car: 07 Liberty TBSTI #139/300
- Real name: Julzzy
Re: Mods list..... Cruisn.
by cruisn » Sat Dec 19, 2009 2:10 pm
Cheers Julz, the wait for the parts to arrive is the killer.
I cant wait to get them all on.
I cant wait to get them all on.
-
cruisn - Posts: 6560
- Joined: Tue Nov 03, 2009 8:09 pm
- Location: Melbourne
- Car: MY02 GTB E Tune
- Real name: Mark
Re: Mods list..... Cruisn.
by julzzychan » Sun Dec 20, 2009 1:03 am
cruisn wrote:Cheers Julz, the wait for the parts to arrive is the killer.
I cant wait to get them all on.
argh hate waiting...i know how you feel Mark haha
where bouts do u live?
Cheers,
Julz
Current - -> MY07 Liberty TBSTI Sedan Black #139/300 - Charcoal Rims, Phat Dump/ Mid pipe, K&N Filter
AWD - SOLD -> MY07 Liberty Obsidian Black[/b] BL5 EJ255 6SP Manual - STI'ed
| 6000K HID | LED I/O | STi Front/Rear Lip Spoilers | STI Braided Brake Lines | Silver 18" x 7.5 Enkei | Phat Dump Pipe | Centre - S/S Flex with 3" Resonator joint with 2.5" S/S Y split to M/S Hurricane Quad Mufflers | Blackened Grill | CF Stanza Eye Lid | Factory Sat-Nav | Resonator Delete | 50% Smoked Taillight | K2 Roof Finisher | Zero Side Strake Pair | DAMD Rear Extension pair | Cobb SF Intake Black | Grimspeed 3-port BCS | AVO Turbo Inlet + 265lph Fuel Pump | KidoTuned 189kW ATW |
1WR - SOLD -> MY06 Honda Black/Grey CBR600RR | Jardine RT-One Slip-On Pipe | ASV Lever | Diable Rosso II | Braided Brake Lines | Quick Shifter | PCIII
Julz
Current - -> MY07 Liberty TBSTI Sedan Black #139/300 - Charcoal Rims, Phat Dump/ Mid pipe, K&N Filter
AWD - SOLD -> MY07 Liberty Obsidian Black[/b] BL5 EJ255 6SP Manual - STI'ed
| 6000K HID | LED I/O | STi Front/Rear Lip Spoilers | STI Braided Brake Lines | Silver 18" x 7.5 Enkei | Phat Dump Pipe | Centre - S/S Flex with 3" Resonator joint with 2.5" S/S Y split to M/S Hurricane Quad Mufflers | Blackened Grill | CF Stanza Eye Lid | Factory Sat-Nav | Resonator Delete | 50% Smoked Taillight | K2 Roof Finisher | Zero Side Strake Pair | DAMD Rear Extension pair | Cobb SF Intake Black | Grimspeed 3-port BCS | AVO Turbo Inlet + 265lph Fuel Pump | KidoTuned 189kW ATW |
1WR - SOLD -> MY06 Honda Black/Grey CBR600RR | Jardine RT-One Slip-On Pipe | ASV Lever | Diable Rosso II | Braided Brake Lines | Quick Shifter | PCIII
-
julzzychan - -stickered-
- Posts: 728
- Joined: Mon Aug 06, 2007 3:28 pm
- Location: Clayton, Melbourne
- Car: 07 Liberty TBSTI #139/300
- Real name: Julzzy
-
cruisn - Posts: 6560
- Joined: Tue Nov 03, 2009 8:09 pm
- Location: Melbourne
- Car: MY02 GTB E Tune
- Real name: Mark
Re: Mods list..... Cruisn.
by Fangin_RX » Sun Dec 20, 2009 1:36 pm
Damn your a nut 
, The cars gonna look awesome dude. I like the Stuff you did with that Sp20
, The cars gonna look awesome dude. I like the Stuff you did with that Sp20MY00 Subaru Liberty (Legacy) RX 2.5L / 2009 Honda CRF250R
P PLATER
-------------------------------------------------------
P PLATER
-------------------------------------------------------
-
Fangin_RX - -stickered-
- Posts: 1892
- Joined: Sun Nov 16, 2008 11:26 am
- Location: Sydney, NSW
- Car: MY00 Liberty RX 2.5L - Gen 3
- Real name: Ethan
Who is online
Users browsing this forum: Google [Bot] and 5 guests