Member Profile - Arjag's Gen3

[Adrian2627]

I wouldn't worry about the HD mounts as with your suspension parts you are obviously just looking to improve the handling not set it up for the track. The standard mounts are fine for a road car driven properly. If you plan on going for a more hardcore suspension set up in the future I would then add the HD mounts. But you'd also be looking at adding bracing, camber adjustment, coilovers etc.

[arjag]

hi, yeah it is just a refresh of the worn bits + sway bars and springs. It's actually the first time I have had the chance to spend this much on suspension. With previous cars it was just chasing worn parts to keep safe and nearly as good as stock.

It is my daily drive. I am actually unsure about the springs. I am kind of expecting them to be too harsh and am prepared to put stock ones back in and add saggy ass spacers to level the situation.



swyped from my JB GT-N8000 with TapatalkHD

[arjag]

So, after much stuffing around with the wrong springs and trying different ones.....