Member Profile - James' GT spec B Wagon - GTB013

Show off what mods you've done to your car.

Re: Member Profile - James' GT spec B Wagon - GTB013

Postby jamescd » Tue Jul 16, 2019 12:18 pm

bigBADbenny wrote:I can’t even comment, its just so awesome!!! :P


Damn, that's one hell of a compliment coming from you!

I have also finished my fire extinguisher bracket.
I welded it together (not the best welds, but they are strong)
Image
Image

Grinded the welds flat and curved all the corners
Image
Image

A few coats of paint
Image

I left it to dry overnight, then attached the extinguisher bracket with some M5 bolts and nylon locking nuts.
Image

And finally installed it in the car, pretty happy with how it turned out to be honest, and the seat still has its full range of motion.
Image

This morning I also decided that it was time to finally change my blown headlight bulb.
Bulb out, uh oh.
Image

That's not just a new bulb fix.
Fortunately I had a light laying around which I scavenged the ballast from, it looked a bit water damaged though, so I wasn't sure if it would work.
Image

The one in the car looked great which was a little annoying.
Image
Image

But, despite how iffy it looked, I put it in the car and it worked!
Image

I also changed my driver's side brake light as that was out.
User avatar
jamescd
 
Posts: 87
Joined: Mon Oct 13, 2014 9:35 pm
Location: Hobart, Tasmania
Car: 2007 Liberty GT spec b
Real name: James
Profile URL: viewtopic.php?f=10&t=35401

Re: Member Profile - James' GT spec B Wagon - GTB013

Postby bigBADbenny » Tue Jul 16, 2019 1:33 pm

Yeah nar, both my igniters (sockets) went out at around 220klm. Same same: toasted.
I guess next time I’ll just crimp new ones to the old ballast with a few layers of heatshrink...
Well once my stash of spares runs out :P

That bracket looks to be inspired by one I developed with Kap: should work on the drivers side too ;)
User avatar
bigBADbenny
 
Posts: 8725
Joined: Tue Oct 04, 2011 6:36 pm
Location: Collingwood, Melbourne
Car: MY07 GT-B 6MT OBP Wagon
Real name: Ben Richards
Profile URL: http://tinyurl.com/agvbzop

Re: Member Profile - James' GT spec B Wagon - GTB013

Postby jamescd » Sat Jul 20, 2019 1:44 pm

I wasn't expecting to have an update this soon, but something that I have been waiting for for ages has arrived.
Image
It came with rears too, I just didn't get any photos of them.

I wasted absolutely no time in ripping out the old seats.

These seats don't have a side airbag, so I have done the 3.3ohm resistor mod
Image

The new seats don't have a memory function (never used it anyway), which meant that the plugs are different.
Image
Image

Nothing some crimp connectors couldn't fix (still wanted to be able to unplug the seat if needed)
Image

Now for some glamour shots.
Image
Image
Image
Image
Image

Now to find some blue suede to do my door cards with.
User avatar
jamescd
 
Posts: 87
Joined: Mon Oct 13, 2014 9:35 pm
Location: Hobart, Tasmania
Car: 2007 Liberty GT spec b
Real name: James
Profile URL: viewtopic.php?f=10&t=35401

Re: Member Profile - James' GT spec B Wagon - GTB013

Postby bigBADbenny » Sat Jul 20, 2019 6:06 pm

Gen4 postfl rally seats?
Some special jdm model?
They looks grouse!
User avatar
bigBADbenny
 
Posts: 8725
Joined: Tue Oct 04, 2011 6:36 pm
Location: Collingwood, Melbourne
Car: MY07 GT-B 6MT OBP Wagon
Real name: Ben Richards
Profile URL: http://tinyurl.com/agvbzop

Re: Member Profile - James' GT spec B Wagon - GTB013

Postby Miboosta » Sun Jul 21, 2019 7:39 am

Nice updates!

Is the extinguisher required to be positioned like this for track events?
Miboosta
 
Posts: 75
Joined: Thu Jun 26, 2014 12:59 pm
Location: Greta
Car: MY 07 GTB
Real name: Dan

Re: Member Profile - James' GT spec B Wagon - GTB013

Postby jamescd » Sun Jul 21, 2019 7:41 am

They're from a preFL (so they are tons more supportive than my old seats), and they came out of a JDM Legacy WR (world rally) limited.
I've had my eye on them for ages, but finally bit the bullet, and they look even better than I was hoping.
User avatar
jamescd
 
Posts: 87
Joined: Mon Oct 13, 2014 9:35 pm
Location: Hobart, Tasmania
Car: 2007 Liberty GT spec b
Real name: James
Profile URL: viewtopic.php?f=10&t=35401

Re: Member Profile - James' GT spec B Wagon - GTB013

Postby applegeek897 » Fri Jul 26, 2019 8:48 am

That's sick dude, I don't know of anyone else running them Aus, super cool. I love how with your build you're doing things a little differently to everyone else, just like with the brake set up! Great stuff as always.
Daily: '00 Daihatsu Cuore "Kelly" - Build Thread -
Project / Weekender: '05 Subaru Liberty 3.0R-B Wagon - Build Thread -
Motorcycle: '14 Triumph Street Triple 660 - Build Thread -
User avatar
applegeek897
 
Posts: 245
Joined: Sun Jun 07, 2015 1:02 am
Location: Sydney, NSW
Car: 05' 3R-B Wagon, 00' Daihatsu Cuore
Real name: James
Profile URL: viewtopic.php?f=10&t=31247

Re: Member Profile - James' GT spec B Wagon - GTB013

Postby jamescd » Sun Jul 28, 2019 9:06 pm

applegeek897 wrote:That's sick dude, I don't know of anyone else running them Aus, super cool. I love how with your build you're doing things a little differently to everyone else, just like with the brake set up! Great stuff as always.


Haha you say that, but I discovered after installing my seats that there is another guy in Aus running these seats... And the same Wedssport SA-15R as me. @_Allnighter on instagram, not sure if he's on here.
However I am trying to keep things a little different, but mainly I'm just going with what I like the look and feel of.
User avatar
jamescd
 
Posts: 87
Joined: Mon Oct 13, 2014 9:35 pm
Location: Hobart, Tasmania
Car: 2007 Liberty GT spec b
Real name: James
Profile URL: viewtopic.php?f=10&t=35401

Re: Member Profile - James' GT spec B Wagon - GTB013

Postby jamescd » Mon Aug 12, 2019 12:27 pm

Recently while driving I have been getting smoke from the engine bay. I had a chance to have a bit of a look and saw this:
Image
I figured it was most likely the rocker cover gaskets, but could also be the turbo/AVCS line. I ordered the rocker parts from partsouq and I also have fittings and hose to make a new oil feed line.

My rocker stuff arrived and I tackled it on the weekend.
Image
I didn't take many photos, but the old gaskets were incredibly brittle
Image
New bolts, because why not.
Image
I put the new ones in and put RTV on the required sections and then put the rocker cover back on
https://i.imgur.com/CU789Jyl.jpg

When taking the cover off one of the breather lines was super perished and when taking it off it snapped.
Image
Image
Luckily I had plenty of hose laying around, so I've replaced that section. I also got rid of the awful spring clamps
Image


Nothing hugely exciting, but it has fixed my oil leak.


I also had my fuel harness and air pump relay recalls done today. Then I got my car scrutineered for the Lufra hillclimb this Saturday. Be interesting to see how it goes.
User avatar
jamescd
 
Posts: 87
Joined: Mon Oct 13, 2014 9:35 pm
Location: Hobart, Tasmania
Car: 2007 Liberty GT spec b
Real name: James
Profile URL: viewtopic.php?f=10&t=35401

Previous

Return to Post your mods

Who is online

Users browsing this forum: No registered users and 4 guests